Specifications

Alpha 9500 HF Linear Amplifier Operating Manual Alpha Radio Products
Introduction Product Release 1
DOCNUMBER 9500
Document Issue 1, Revision 7
Page 1–2 June 2009
11
1
Figure 1-1 ALPHA 9500
1.2 Product Capabilities
Product capabilities include:
•
Continuous RF output. The ALPHA 9500 is capable of 1.5 kW
continuous RF output on all commonly used modes and on any
authorized amateur frequency from 1.8 to 29.7 MHz (other than the
60-MHz band).
•
Compatibility with popular amateur transceivers and exciters. The
ALPHA 9500 requires approximately 50-65 W peak RF drive for
1.5-kW output.
•
Capable of full CW break-in, QSK, and all digital modes when used
with any appropriate transceiver.
•
Built-in protective functions. The control system incorporates
protective functions that minimize the probability of accidental
damage to the amplifier or its power tubes. In most cases, when one
of the protective functions is tripped, the amplifier goes to standby.
•
USB and serial interface allow for remote operations, diagnostics,
and firmware upgrades.
1.3 Safety Considerations
•
Locate the ALPHA 9500 where there is good air circulation all
around and on top of the cabinet. The unit may become hot during
operation.