Specifications

Alpha 9500 HF Linear Amplifier Operating Manual Alpha Radio Products
Maintaining and Upgrading the Amplifier Product Release 1
DOCNUMBER 9500
Document Issue 1, Revision 7
Page 8–10 June 2009
88
8
Figure 8-8 Programming cable, end 2
Figure 8-9 3-pin header
Step 7 Connect the reset-push-button cable to the 5-pin connector.
Step 8 Plug the amplifier in but DO NOT turn it on.
Step 9 Start the Colt Bootloader and select the COM port that was used for the
ma
in-controller upgrade, with the same communications parameters:
•
115,200 baud
•
No parity
•
1 stop bit
•
8 data bits
•
Flow control = NONE