Specifications

Alpha 9500 HF Linear Amplifier Operating Manual Alpha Radio Products
Setting Up the Amplifier Product Release 1
DOCNUMBER 9500
Document Issue 1, Revision 7
Page 5–4 June 2009
55
5
Figure 5-4 Securing transformer
Step 4 Carefully rotate the amplifier back to its standard orientation.
5.3 Connect the Transformer
Procedure 5-3 Connect the transformer
Step 1 Connect the transformer to the chassis.
Figure 5-5
Connecting transformer to chassis
1a Align the transformer’s Molex plug with the connector at the back of
the amplifier.
1b Push to connect them so that they are fully mated.
Step 2 Connect the transformer to
the amplifier’s high-voltage (HV) board (the
lower of the two boards).
2a Locate the transformer’s 7-pin HV connector. Move the 2-pin mains
connector out of the way as needed to do so.