Specifications

• Sub-menu „Measuring / Weighing“ (Option)
Starting from the main menu by means of the key ENTER at „measuring / weighing“.
The three inputs for measuring, weighing and height measuring of the specimen can be switched on and
off separately, if these connections are installed and released in the works conguration.
commutation ON/OFF
In the beginning of the test the specimen’s dimensions are selected by means of key CALC. With key
START you can switch over to the measuring screen.
Length: Input by means of a connected sliding caliper or by means of the keyboards
and key ENTER.
Width: Input by means of a connected sliding caliper or by means of the keyboards
and key ENTER.
Height: Input by means of a connected sliding caliper or by means of the keyboards
and key ENTER.
In case of conguration of a height measuring i.e. displacement measuring system at the test cylinder,
this fade-in does not appear.
Weight: Input by means of a connected balance or by means of the keyboards and
key ENTER.
Starting of the test cylinder
START
0
MA
Page 32
Set up
M1
Vernier Inp. ON
: 150,0 mm
Plate: 35,0 mm
: Choice
: Abort
Balance Inp. MET
Height measur ON
Cube
MA
ESC
Dimensions
Lenght
Wid
th
Weight
Bulk density
Start
ESC
: 150,0 mm
: 150,0 mm
Height: 150,0 mm
: 7520 g
: 2228kg/ m
: Furtheron
: Abort
3