Specifications

Page 26

• Sub - menu "Calibration"

Select sub-menu: factory calibration

Set cursor to calibration

Press ENTER

Set the calibration code XXXX

Select the machine.

Set cursor to the required line.

Press ENTER to reach the desired machine.

• Calibration Layout

Delete the table (in case of rst calibration only).

Reset the display to zero (rst calibration: zero reset with trimmer Z)

The calibration is executed at 80% of the measuring range.

Run selected calibration value manually according to the calibration instrument asdescribed

under point "Manual operation". The display can deviate from the screen.

The machine discharges. The calibration value is newly calculated. First

calibration: Run calibration value according to display. Set calibration value

with trimmer G at the calibration instrument.

CAL. FUNCTIONS

Machine 1-2

Calibration

Delete calib.

calib. table

Delete table

Print cal. table

Calibr. values

Control calibrat

ESC

Linearisation

: Abort

START

ZERO

• Delete cal

The saved calibration is deleted.