Specifications
• Print command of print-out
The print-out is automatically started by the break detection.
By pressing the DATA key the print-out can be started manually. Then according to the conguration
(sliding caliper, balance) the displayed measuring value, the specimen’s number, the type (in case of
N/mm² only) and the date are printed.
In case of connected sliding caliper and/or balance the following print-out is made:
Example 1. Example 2:
(measuring + weighing)
Example 3: Example 4:
(with option E-Software) (with option E-software
measuring + weighing)
Force average + 572.2 kN Bulk dens.aver.2837 kg/m3
Quantity 3 Force aver. +35.7 N/mm2
Break3 + 564.5 kN Quantity 3
Break2 + 586.1 kN Strength3 + 35.5 N/mm2
Break1 + 566.0 kN Bulk density 2881 kg/m3
Age 28 Weight 9620 g
Speed. + 11.25 kN/s Height 149.0 mm
No. 3 Width 149.5 mm
Date 17.03.95 Length 149.8 mm
Strength2 + 35.2 N/mm2
Bulk density 2807 kg/m3
Weight 9536 g
Height 150.5 mm
Width 150.2 mm
Length 150.2 mm
Strength1 + 36.4 N/mm2
Bulk density 2823 kg/m3
Weight 9498 g
Height 149.9 mm
Width 149.8 mm
Length 149.8 mm
Age 28
Speed + 0.05 N/mm2/s
Specimen W150
No. 1
Date 17.03.95
By pressing the ENTER key the paper feed is started.
Page 10