Specifications

Option
Move the beam
Selection
Report: Setting of print-out data (date, number of specimen)
corresponding to type of printer and mode.
Test: Entry of a freely programmable test sequence according to the
equipment of the machine.
Test parameter: Inhibit resp. release and programming of machine settings
and test settings corresponding to the selected options.
Specimen cong.: There are available up to 30 free-programmable (in dimensions and
test speed) specimen types as
for example cubes, cylinders and prisms.
Work calibration: Provides menu items protected with a code for calibration and
manufacturer's parametarisation of the system.
Displays the software version.
LCD settings: Contrast adjustment and switching off of the screen (standby).
Save dec. point: Select the display parameter (FO force, DI displacement,
DE deformation). With this menu you can store the places after the
decimal point of the set parameter (FO,DI,DE).
Reset Zero : Release of the tare, which has been effected with zero-
key. Select the display parameter as described under
“Save dec. point”.
Vernier Balance: Switch on the sliding caliper and/or balance. Selection by MA.
(Option)
Page 8
• Main Menu
2
8
Main Menu
M1
Test
Test parameter
Specimen config
Work Calib.
LCD settings
Save dec. point
Zero
Vernier Balance
: Test
Reset
Report
ESC
: Abort