Specifications

Abridged operation manual
DigiMaxx C-20
n
If necessary you can change the display N/mm² referred to
the specimen’s area with button
n
Press
START
. The zero-adjustment is made automatically. The
piston extends and the specimen is loaded with the preset
value until it breaks. After the break the machine reduces
the pressure automatically and the piston returns acc. to the
preset sinking time (menu point “sinking time”)
Now the machine is ready for another test..
After pressing
START
the display is automatically set to zero
while the piston is extending. For this the machine needs
about 2 seconds time. So please take care that the sinking
time is set long enough so that at the next test after pressing
START there are at least 2 seconds left until the piston
contacts the specimen.
n
Switch off the electronic unit by pressing
and then switch
off the machine by actuating the mains switch.
.
C20
Execution of the Test
End of the Test