Specifications

Abridged operation manual
DigiMaxx C-20
n
Switch on the machine by actuating the mains switch and
then switch on the electronic unit by pressing button
.
n
Select the desired machine by pressing button
MA
0
Now –
corresponding to the con guration of the digital display - M1
(up to M4) appears on the screen.
n
Switch over the hydraulic reversing valves to the respective
machine. In case of machines with a solenoid switching valve
the hydraulic and electronic unit are adjusted automatically.
n
Press button
.
n
By means of buttons
and
you can select the sub-
menu Test Ramp.
n
Then press
and select Ramp-Cycles.
n
By pressing
the menu is opened.
n
Enter the following values:
Cycles
0 (no cycles)
Stopping
0,0s
Vel
Vel Vel
desired load speed in kN/s
Max
Max Max
nominal power of the machine
Min
0,0 kN
n
The inputs must be con rmed by pressing
.
n
Then break off with
and memorize with
. For exiting
the menu press
twice.
n
Now insert the specimen.
C20
Kurzbedienung DigiMaxx C-20-e.indd - 1.0 - 07/2006
Selection of the Machine
Preparation of the Test