Specifications

BA
Maintenance Recommendation
At delivery the oil tank is  lled with the required hydraulic oil.
We recommend an oil change every two years.
The oil change has to be effected as follows:
•
See to it that the machine’s piston is in its  nal position.
•
At the hydraulic power unit the oil drain plug is located at
the lower edge of the oil tank. This drain plug has to be
removed and the oil has to be collected in a suitable con-
tainer. Then  x the oil drain plug again.
•
Open the  lling nozzle on the tank cover and  ll in the
new oil by using a funnel. Then close the  lling nozzle.
The oil level has to be checked monthly! Please only use blister-
free and acid-free hydraulic oil (see “our recommendation for
lubricants” on the next page).
Our machines are  lled with: OEST / HLP 68.
Every two weeks you have to do the following:
•
Visual control of the screw connections. If a screw has
loosened please contact us concerning the tightening
torque!