Specifications

BA
Works on the electrical equipment
If an electrical connection is designated the testing machine or
the control console has to be connected only by an authorized
expert. Pay attention to the correct system voltage!
Only skilled and quali ed personnel are allowed to maintain or
repair electrical equipment!
•
Check the electrical equipment regularly!
•
Fix again loose connections !
•
Exchange damaged lines / cables without any delay!
•
Keep the control cabinet always closed! Access is permit-
ted only authorized persons with key / tools.
•
Never steamclean control cabinets and other housings of
electrical equipment (e.g. motors)! Never clean them by
using a water hose!
Works on hydraulic or pneumatic equipment
Only persons with special know-how and knowledge of hydrau-
lics are allowed to maintain or repair hydraulic or pneumatic
equipment!
•
Before maintenance or repair works the pneumatic and
hydraulic equipment of the machine has to be made pres-
sureless!
•
Regularly check all lines, hoses and screwings concer-
ning leakage or externally recognizable defects!
•
Immediately repair any defects!
•
Squirting-out oil can lead to injuries or  re!
•
Hose lines should be exchanged regularly, after 6 years
at the latest (resp. according to speci cations of manu-
facturer), even if no damages are recognizable!
•
Remove flown-out hydraulic oil at once! Slippery!
•
Lay and mount hydraulic lines and compressed-air lines
workmanlike.
•
Pay attention to the correct connections!
Safety Precautions