Operating instructions

8.2 TYPICAL INSTALLATION OF DOOR OPERATOR ON "TRACKLESS"
SPRING BALANCED TIP-UP TYPE DOORS
8.3 INSTALLATION OF DOOR OPERATOR ON SPRING BALANCED
TIP-UP DOOR USING AN EXTENDED TOWING ARM
INSTALLATION IN GARAGE
WITH NORMAL HEADROOM
INSTALLATION IN GARAGE WITH "LOW" HEADROOM
Path of Door
Insufficient clearance available
between door and ceiling.
TRACKLESS TIP-UP DOORS ONLY!!!
If there is insufficient clearance between the path of the door and the ceiling, it is
permissible to move the motor back away from the door and fix the "Anchor Bracket",
(or Header Bracket), to the ceiling and make use of an "Extended Towing Arm" to couple
the door to the operator.
Did your door operator installer demonstrate the correct use and
maintenance of the system to you??? He is required by law to do so!!!
Fig No. 35
Fig No. 36
Note the position of the Door Operator
relative to the door.
Motor-head is approximately at the
same level as the top of the door when
in the open position.
Emergency Release Cord with Label
attached.
Wall-mounted Push-button and
Caution Label mounted adjacent to
access door.
p
o
0
r
a
0
0
-
h
a
p
2
l
*
p
o
0
r
0
a
-
0
h
p
a
2
l
MAN 01 - page 16
Version 5