System information

Upgrading Your System
AlphaServer 1000 to 1000A Upgrade 1-3
Removing Top Cover and Side Panels
To remove the top cover and left side panel, refer to Figure 1 and follow steps 1
through 4.
Caution:
Make sure the system unit is unplugged
before removing the system cover and panels.
Caution:
When handling internal system
components, use an antistatic wrist strap to avoid
damaging the components.
1. Turn the front door lock to the right to unlock the system unit.
2. Pull down the top cover release latch on the front of the system until it catches
in the down position.
3. Grasp the finger groove at the rear of the top cover and pull the top cover
straight back about two inches; lift up on the cover.
4. Pull the top of the side panel back, then up and away from the unit and pull up
on the panel to remove it.