Specifications

5-12 • Installing and Removing Components AlphaServer 1000A Owner's Guide
Figure 5-8 PCI, EISA, and ISA Option Cards
MA00236
ISA
PCI
EISA
2. Remove the screw securing the slot cover to the chassis.
3. Remove the slot cover from the system unit and store it for future use.
4. Carefully install the option card into the appropriate connectors on the system
board and press it firmly into place.
5. Secure the option card to the chassis using the screw you removed.
6. If you have finished removing or installing internal options, reassemble the
system following the procedure described in "Replacing the Top Cover and Side
Panels" earlier in this chapter.
7. Test the option card installation (see the section, "Testing an Option Card
Installation" later in this chapter).