Specifications

5-4 • Installing and Removing Components AlphaServer 1000A Owner's Guide
3. Set the On/Off switch on the system unit to the off position. An interlocking
sensor switch inside the system unit (see Figure 9-4) will automatically turn off
the system if you remove the top cover and have not turned off the system.
4. Turn the front door lock to the right to unlock the system unit.
5. Pull down the top cover release latch on the front of the system until it catches in
the down position.
6. Grasp the finger groove at the rear of the top cover and pull the top cover
straight back about two inches, and lift up on the cover.
7. Pull the top of the side panel back, then up and away from the unit and pull up
on the panel to remove it. (Repeat this step for the other panel.)
Figure 5-2 Removing the Top Cover and Side Panels
Top Cover
Release Latch
MA00914