Specifications

AlphaServer 1000A Owner's Guide Hardware Installation • 2-1
2 Hardware Installation
Introduction
This chapter explains how to set up and install your system hardware. The following
topics are discussed:
Hardware Setup Overview
Selecting a System Location
Identifying Accessories
Connecting a Keyboard, Mouse, or Printer
Connecting a Monitor or Terminal
Connecting to Network Hardware
Verifying Hardware Setup
Locking Your System
Hardware Setup Overview
The steps for setting up your hardware are summarized as follows. Depending on
the options you use with your system, these steps may vary.
1. Select a location for the system, giving consideration to service access,
environmental conditions, and power requirements.
2. Confirm that you have all the desired accessories that ship with the system and
any additional accessories you may want to add.
3. Connect the keyboard, mouse, printer, and monitor or terminal.
4. Connect to the network hardware.
5. Verify your hardware setup.