Specifications

AlphaServer 1000A Owner's Guide Configuring • 6-9
Example 6-3 The show device Command Display
>>> show device
dka400.4.0.6.0 DKA400 RRD45 2893
dva0.0.0.0.1 DVA0
ewa0.0.0.2004.0 EWA0 08-00-2B-E5-6A-41
ewb0.0.0.11.0 EWB0 08-00-2B-E1-03-19
pka0.7.0.6.0 PKA0 SCSI Bus ID 7 2.10
The show memory Command
The
show memory
command displays information for each memory module in the
system. A sample of the
show memory
display is shown in Example 6-4.
Example 6-4 The show memory Command Display
>>> show memory
48 Meg of System Memory
Bank 0 = 16 Mbytes (4 MB Per Simm) Starting at
0x00000000
Bank 1 = 16 Mbytes (4 MB Per Simm) Starting at
0x01000000
Bank 2 = 16 Mbytes (4 MB Per Simm) Starting at
0x02000000
Bank 3 = No Memory Detected
The set and show Commands
The
set
and
show
commands are used to set environment variables. Typically, you
set environment variables when you configure a system.
CAUTION: Environment variables must be entered
exactly as shown, not abbreviated. They will not be
recognized by the system in abbreviated form.
Synopsis:
set envar value [-default] [-integer] [-integer] -[string]
show envar
Arguments: