Specifications

AlphaServer 1000A Owner's Guide Installing and Removing Components • 5-21
Figure 5-12 Installing a CDROM Drive
Drive
Bracket
Screws
Data Cable
Power Cable
MA00918
To install a StorageWorks drive, refer to Figure 5-13 and follow these steps:
1. If your StorageWorks drives are plugged into a RAID controller, go to step 2. If
your drives are not plugged into a RAID controller, shut down the operating
system before you go to step 2.
2. Remove a blank bezel or drive by pressing the two mounting tabs and pull the
unit out of the shelf.