Instruction manual

Using the AlphaBIOS Menus
4-8 AlphaServer 1000/1000A Supplement
Figure 4-4 Execute Run Maintenance Program
AlphaBIOS Setup
Display System Configuration...
Upgrade AlphaBIOS
Hard Disk Setup...
CMOS Setup...
Install Windows NT
Utilities
About AlphaBIOS...
Run Maintenance Program F1=Help
Program Name: ecu.exe
Location:
A:
A:
CD:
Disk 0, Partition 1
Disk 0, Partition 2
Disk 1, Partition 1
ENTER=Execute
.
PK-0730-96
Note:
If you are running a utility from a diskette,
you can simply type the utility’s name into the
Program Name field, and press Enter. The diskette
drive is the default selection in the Location field.
Use Alt+Down arrow when a list box is selected,
to open the list.
Setting Up Password Protection
Password protection provides two levels of security for your system: setup
protection and startup protection. When system setup protection is enabled, a
password is required to start AlphaBIOS Setup. When startup password protection
is enabled, a password is required before the system initializes.
Caution:
Take care to remember your password. To
clear the password requires replacement of a system
board component.
Startup password protection provides more comprehensive protection than setup
password protection because the system cannot be used at all until the correct
password is entered.