Instruction manual

Using the SRM Console
AlphaServer 1000/1000A Supplement 2-3
contains a PCI-to-PCI bridge, the bus number increments by 1, and the
logical numbers start anew at 0.
Note:
The onboard SCSI controller (Qlogic 1020A) is
always device
pka
.
Example 2-1 AlphaServer 1000A show config Command Display
>>> show config
Digital Equipment Corporation
AlphaServer 1000A 5/300
Firmware
SRM Console: X4.5-4322
ARC Console: 5.12
PALcode: VMS PALcode V1.18-2, OSF PALcode V2.21-4
Serial Rom: T1.1
Processor
DECchip (tm) 21164-5 300MHz
Memory
64 Meg of System Memory
Bank 0 = 64 Mbytes (16 MB per Simm) Starting at 0x00000000
Bank 1 = No Memory Detected
Bank 2 = No Memory Detected
Bank 3 = No Memory Detected
Slot Option Hose 0, Bus 0, PCI
7 Intel 82375EB Bridge to Bus 1, EISA
8 DECchip 21050-AA Bridge to Bus 2, PCI
11 DECchip 21040-AA ewb0.0.0.11.0 08-00-2B-E5-CC-B1
Slot Option Hose 0, Bus 1, EISA
1 DE422 era0.0.0.1001.0 08-00-2B-39-4F-4E
Slot Option Hose 0, Bus 2, PCI
0 Qlogic ISP1020 pka0.7.0.2000.0 SCSI Bus ID 7
dka0.0.0.2000.0 RZ26L
dka400.4.0.2000.0 RRD43
4 DECchip 21050-AA Bridge to Bus 3, PCI
Slot Option Hose 0, Bus 3, PCI
0 DECchip 21040-AA ewa0.0.0.3000.0 08-00-2B-E2-31-68
2 Qlogic ISP1020 pkb0.7.0.3002.0 SCSI Bus ID 7
3 Qlogic ISP1020 pkc0.7.0.3003.0 SCSI Bus ID 7
>>>