Instruction manual
Hardware Updates
AlphaServer 1000/1000A Supplement 1-5
Beep Code Information
Two beep codes that you may encounter while using your system should
be added to the codes listed in Chapter 8 of your Owner’s Guide. The
codes are shown in Table 1-2.
Table 1-2 Beep Codes
Beep Code Meaning Action
1 at system start-up System start-up is successful. None
1-2-4 Backup cache error Disable Bcache on power-up
using Bank 4 of the J1 or J4
jumper on the CPU board.
Call your service representative
for a replacement CPU board.