Installation manual

CPU Module Installation and Firmware Update
3–2
AlphaServer 1000/1000A CPU Upgrade Guide
Caution
Use the antistatic wrist strap provided with the upgrade kit to
avoid damaging components.
1. Unscrew the crossbar that secures the outer edge of the CPU module.
2. Lift up on the other end of the bar. Release the module by extending the handle
clip on each end outward.
3. Holding the outer edge of the module, gently pull it out of its system backplane
slot.
Figure 3-1: Removing/Installing the CPU Module
CPU Card
Handle Clip
Crossbar
Retaining
Screw
MA00944