Installation manual
AlphaServer 1000/1000A CPU Upgrade Guide 3–1
3
Installing the CPU and Updating the
Console Firmware
This chapter explains how to update the ARC and SRM console firmware using the
firmware diskette provided with the upgrade kit. The chapter also describes how to
remove the old CPU module and install the upgrade CPU module. During the update
process, the ARC console firmware is replace with AlphaBIOS console firmware, which
supports the 5/xxx CPU.
Procedure Using Firmware Update Diskettes
Step 1: Shut Down the Operating System.
Step 2: Power down the system.
Press the DC On/Off button to turn the system off and unplug the AC power cord for each
power supply.
Step 3: Remove the Existing CPU module and install the
Performance-Enhanced AlphaServer CPU module.
A. Remove the top cover and side panel to gain access to the CPU module. Refer to your
system Owner’s Guide for instructions.
B. Remove the existing CPU module as follows, refer to Figure 3-1.
Warning
The CPU modules has parts that operate at high temperatures.
Wait 2 minutes after power is removed before handling these
modules.