User`s guide

5.1.4.2 show device
The
show device command displays the devices and controllers in the system.
The device name convention is shown in Figure 5–2.
Figure 5–2 Device Name Convention
dka0.0.0.0.0
Hose Number:
Slot Number:
Channel Number:
Bus Node Number:
Device Unit Number:
Used for multi-channel devices.
Bus Node ID
Unique device unit number
0 PCI_0 (32-bit PCI); 1 EISA; 2 PCI_1
Adapter ID:
Driver ID: Two-letter port or class driver designator:
PU--DSSI port, DU--DSSI disk, MU--DSSI tape
PK--SCSI port, DK--SCSI disk, MK--SCSI tape
EW--Ethernet port (TULIP chip, DECchip 21040)
MA00369
One-letter adapter designator (A,B,C...)
ER--Ethernet port (LANCE chip, DEC 4220)
DR--RAID-set device
SCSI unit numbers are forced to 100 x Node ID
DV--Floppy drive
For EISA options---Correspond to EISA card cage slot numbers (1--*)
For PCI options---Slot 0 = Ethernet adapter (EWA0) or
Slot 1 = SCSI controller on standard I/O or I/O backplane
Slot 2 = EISA to PCI bridge chip
Slots 3--5 = Reserved
Slots 6--8 = Correspond to PCI card cage slots: PCI0, PCI1, and PCI2
reserved on AlphaServer 2000 systems.
Synopsis:
show device [device_name]
Argument:
[device_name] The device name or device abbreviation. When abbreviations or
wildcards are used, all devices that match the type are displayed.
System Configuration and Setup 5–11