User`s guide

5.1.3.1 Display Hardware Configuration
The hardware configuration display provides the following information:
• The first screen displays the boot devices.
• The second screen displays processor information, the amount of memory
installed, and the type of video card installed.
• The third and fourth screens display information about the adapters installed
in the system’s EISA and PCI slots.
Table 5–1 lists the steps to view the hardware configuration display.
Table 5–1 Listing the ARC Firmware Device Names
Step Action Result
1 If necessary, access the Supplementary menu. The system displays the
Supplementary menu.
2 Choose Display hardware configuration and press
Enter.
The system displays the
hardware configuration
screens.
Table 5–2 explains the device names listed on the first screen of the hardware
configuration display.
Note
The available boot devices display does not list tape drives or network
devices.
Table 5–2 ARC Firmware Device Names
Name Description
multi(0)key(0)keyboard(0)
multi(0)serial(0)
multi(0)serial(1)
The multi( ) devices are located on the system module.
These devices include the keyboard port and the serial
line ports.
eisa(0)video(0)monitor(0)
eisa(0)disk(0)fdisk(0)
The eisa( ) devices are provided by devices on the EISA
bus. These devices include the monitor and the diskette
drive.
(continued on next page)
System Configuration and Setup 5–5