Users Manual

1 OF 9
GENERAL SAFETY REGULATIONS
1. Keep the work area clean and dry. Damp or wet work areas can
result in injury.
2. Keep children away from work area. Do not allow children to handle
this product.
3. There are certain applications for which this equipment was
designed. It will do the job better and more safely at the capacity for
which it was intended. Do not modify this equipment, and do not use
this equipment for a purpose for which it Was not intended.
4. Before using this product, carefully check that it will operate properly
and perform its intended function.
5. Do not overreach. Keep proper footing and balance at all times to
prevent tripping, falling, back injury, etc.
6. DO NOT use the equipment when tired or under the influence of
drugs, alcohol, or medication. A moment of inattention while
operating this equipment may result in serious personal injury.
7. Ensure that only the qualified electrician can service this socket. And
it must not be used by children or unskilled persons.
8. Ensure that power supply voltage does not exceed maximum
voltage rating of socket.
9. Ensure that socket is properly be installed before connecting to
power supply.
10. Ensure that all electrical power is removed form socket before
servicing.
11. Check for frayed and broken wires before each use.
12. Remove power from the socket immediately when any malfunction
occurs.
13. Never remove, tamper with or cut the safety devices fitted by the
manufacture.