Datasheet

ManualsBrandsAlpha Wire ManualsCable & WireHeat-Shrink Tubing 5.6:1, 22.8 ... 101.6mm, Black, 1.22m

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

Customer Specification

PART NO. FIT-621-4

Construction

1) Tubing Type Adhesive Lined Heat Shrinkable Tubing

2) Tubing Material Dual Wall Flexible PO w/Thick Wall Adhesive

3) Minimum Supplied ID(In) 4.000

4) Maximum Recovered ID(In) 0.898

5) Minimum Recovered Adhesive Wall Thickness(In) 0.155

6) Color(s) BLACK

Applicable Specifications

Environmental

1) EU Directive 2011/65/EU(RoHS2):

All materials used in the manufacture of this part are in compliance with European Directive

2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and

electronic equipment. Consult Alpha Wire's web site for RoHS C of C.

2) REACH Regulation (EC 1907/2006):

This product does not contain Substances of Very High Concern (SVHC) listed on the European

Union's REACH candidate list in excess of 0.1% mass of the item. For up-to-date information,

please see Alpha's REACH SVHC Declaration.

3) California Proposition 65:

The outer surface materials used in the manufacture of this part meet the requirements of

California Proposition 65.

Properties

Summary of content (4 pages)

PAGE 1
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Customer Specification PART NO. FIT-621-4 Construction 1) Tubing Type Adhesive Lined Heat Shrinkable Tubing 2) Tubing Material Dual Wall Flexible PO w/Thick Wall Adhesive 3) Minimum Supplied ID(In) 4.000 4) Maximum Recovered ID(In) 0.898 5) Minimum Recovered Adhesive Wall Thickness(In) 0.
PAGE 2
Physical & Mechanical Properties 1) Temperature Range -55 to 90°C 2) Shrink Ratio Approximately 5.6:1 3) Full Recovery Temperature 121°C 4) Tensile Strength 1200psi, Min ASTM D638 5) Elongation 200%, Min ASTM D638 6) Low Temperature Flex(-55°C) no cracking AMS-DTL-23053 7) Heat Resistance(175°C,168hrs) 100% Elongation, Min ASTM D638 8) Heat Shock(225°C,4hrs) no cracking AMS-DTL-23053 9) Secant Modulus 2.
PAGE 3
Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure their accuracy at the time of publication, information and specifications described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not ensure product availability. Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or implied.
PAGE 4
EU/China ROHS CERTIFICATE OF COMPLIANCE To Whom It May Concern: Alpha Wire Part Number: FIT-621-4 FIT-621-4 , RoHS-Compliant Commencing With 5/1/2004 Production Note: all colors and put-ups This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use of certain hazardous substances used in the manufacture of electrical an