Datasheet

ManualsBrandsAlpha Wire ManualsCable & WireMulticore Cable, YY Unshielded, PVC, 12x 0.62mm², 30m, Grey

Cables you trust. Service you deserve.

Xtra-Guard®

Performance Cable

Summary of content (109 pages)

PAGE 1
Xtra-Guard® Performance Cable
PAGE 2
Table of Contents Xtra-Guard® Performance Cable 3 Ultimate Performance in Extreme Environments Xtra-Guard 1 Cable 5 High Performance Enhanced PVC Xtra-Guard 2 Cable 31 Oil and Abrasion Resistant Polyurethane Xtra-Guard 3 Cable 45 Direct Burial Polyethene Xtra-Guard 4 Cable 53 Advanced High/Low-Temperature Performance TPE Xtra-Guard 5 Cable 68 Maximum Temperature and Chemical Performance FEP Xtra-Guard Flex Cable 78 Long Lasting Performance Xtra-Guard Standard Flex Cable 80 Light to M
PAGE 3
Xtra-Guard® Performance Cable Ultimate Performance in Extreme Environments Alpha Wire’s Xtra-Guard cable brings performance and reliability to the biggest challenges in the toughest environments. No matter what extremes your application faces, you’ll find an Xtra-Guard cable that excels in meeting your requirements. Downtime is costly— whether caused by a complete cable failure or from the little glitches that occur when a cable doesn’t live up to the demands of the application.
PAGE 4
Xtra-Guard Shielding Options Alpha Wire offers Xtra-Guard cables in three shielding options to handle virtually any electrical environment. Unshielded Unshielded cables provide the smallest cable diameter for use in low-noise controlled environments. Foil shielded Foil-shielded cables use a sturdy aluminum/polyester shield for moderate EMI needs, especially at lower frequencies. A tinned copper drain wire makes grounding the cable easy. Foil shields allow lighter weights and smaller cables.
PAGE 5
Xtra-Guard® 1 High Performance Enhanced PVC Features Applications • F ast, easy stripping of insulation and jacket • Color-coded, tinned copper conductors • Premium-grade PVC insulation and jacket for easier cable routing in small spaces • 300 V and 600 V • Unshielded, foil shielded, or Supra-Shield® Foil + Braid • 105°C temperature rating • UL VW-1, UL 1685, and CSA FT-4 flammability rating • IEC 60322-1 and -2 Flame Behavior • Nylon ripcord for easy jacket stripping • UL Oil Res.
PAGE 6
Xtra-Guard® 1 High Performance 300 V Unshielded, Multiconductor 28 AWG (0.09 mm2) Stranding: 7/36 (7 x 0.127 mm) Insulation thickness: 0.010 (0.
PAGE 7
Xtra-Guard® 1 High Performance 300 V Unshielded, Multiconductor 22 AWG (0.35 mm2) Stranding: 7/30 (7 x 0.25 mm) Semi-rigid PVC insulation, thickness: 0.010 (0.
PAGE 8
Xtra-Guard® 1 High Performance 300 V Unshielded, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.016 (0.
PAGE 9
Xtra-Guard® 1 High Performance 300 V Unshielded, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) UL CM UL AWM 2343 VW-1 CSA CMG FT4 Part Number Conductors 5201C 5202C 5203C 5204C 5206C 7 12 15 19 37 Operating Temperature • Chart E • Jacket Colors: Nine available (slate standard) Materials • S tranded tinned copper conductors • Premium semi-rigid PVC insulation • Nylon ripcord • Premium PVC jacket Features • UL 60°C Oil (Oil Res.
PAGE 10
Xtra-Guard® 1 High Performance 600 V Unshielded, Multiconductor 22 AWG (0.35 mm2) Stranding: 7/30 (7 x 0.25 mm) Insulation thickness: 0.032 (0.81 mm) UL CM UL AWM 2501 VW-1 UL MTW CSA AWM I/II A/B FT4 Part Number Conductors 5402 5404 5405 5409 5409/19 2 4 5 9 19 Conductor Color Coding • Chart E • Jacket Colors: Nine available (slate standard) Materials Stranding: 7/28 (7 x 0.32 mm) Insulation thickness: 0.032 (0.
PAGE 11
Xtra-Guard® 1 High Performance 600 V Unshielded, Multiconductor 16 AWG (1.23 mm2) Stranding: 19/0.0117 (19 x 0.29 mm) Insulation thickness: 0.032 (0.81 mm) UL CM UL AWM 2501 VW-1 UL MTW CSA AWM I/II A/B FT4 Part Number Conductors 5434 5435 5437 5439 5439/12 5439/15 5439/19 5439/25 4 5 7 9 12 15 19 25 Nominal Diameter Inch mm 0.428 10.87 0.464 11.79 0.502 12.75 0.579 14.71 0.641 16.28 0.698 17.73 0.746 18.95 0.908 23.06 Jacket Thickness Inch mm 0.063 1.60 0.063 1.60 0.063 1.60 0.063 1.60 0.063 1.
PAGE 12
Xtra-Guard® 1 High Performance 300 V Foil Shield, Multiconductor 28 AWG (0.09 mm2) Stranding: 7/36 (7 x 0.127 mm) Insulation thickness: 0.010 (0.
PAGE 13
Xtra-Guard® 1 High Performance 300 V Foil Shield, Multiconductor 22 AWG (0.35 mm2) Stranding: 7/30 (7 x 0.25 mm) Semi-rigid PVC insulation, thickness: 0.010 (0.
PAGE 14
Xtra-Guard® 1 High Performance 300 V Foil Shield, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.016 (0.
PAGE 15
Xtra-Guard® 1 High Performance 300 V Foil Shield, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.
PAGE 16
Xtra-Guard® 1 High Performance 600 V Foil Shield, Multiconductor 22 AWG (0.35 mm2) Stranding: 7/30 (7 x 0.25 mm) Insulation thickness: 0.032 (0.
PAGE 17
Xtra-Guard® 1 High Performance 600 V Foil Shield, Multiconductor 16 AWG (1.23 mm2) Stranding: 19/0.0117 (19 x 0.29 mm) Insulation thickness: 0.032 (0.
PAGE 18
Xtra-Guard® 1 High Performance 300 V Supra-Shield® Foil + Braid, Multiconductor 28 AWG (0.09 mm2) Stranding: 7/36 (7 x 0.127 mm) Insulation thickness: 0.010 (0.
PAGE 19
Xtra-Guard® 1 High Performance 300 V Supra-Shield® Foil + Braid, Multiconductor 22 AWG (0.35 mm2) Stranding: 7/30 (7 x 0.25 mm) Semi-rigid PVC insulation, thickness: 0.010 (0.
PAGE 20
Xtra-Guard® 1 High Performance 300 V Supra-Shield® Foil + Braid, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.016 (0.
PAGE 21
Xtra-Guard® 1 High Performance 300 V Supra-Shield® Foil + Braid, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.
PAGE 22
Xtra-Guard® 1 High Performance 600 V Supra-Shield® Foil + Braid, Multiconductor 22 AWG (0.35 mm2) Stranding: 7/30 (7 x 0.25 mm) Insulation thickness: 0.032 (0.81 mm) UL AWM 2501 VW-1 CSA AWM I/II A/B FT4 UL MTW Part Number Conductors 5504 5507 5509/12 4 7 12 Conductor Color Coding • C hart E • Jacket Colors: Nine available (slate standard) Stranding: 10/30 (10 x 0.25 mm) Insulation thickness: 0.032 (0.
PAGE 23
Xtra-Guard® 1 High Performance 600 V Supra-Shield® Foil + Braid, Multiconductor 16 AWG (1.23 mm2) Stranding: 19/0.0117 (19 x 0.29 mm) Insulation thickness: 0.032 (0.
PAGE 24
Xtra-Guard® 1 High Performance 300 V Unshielded, Multipair 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) UL CM UL AWM 2464 VW-1 CSA CMG FT4 Operating Temperature • –35°C to +80°C (AWM) • –35°C to +105°C (CM) Part No. Pairs 5261C 5262C 5263C 5264C 5265C 5266C 5269C 5269/11C 5269/15C 5269/27C 5269/77C 1 2 3 4 5 6 9 11 15 27 77 Nominal Diameter Inch mm 0.156 3.96 0.212 5.38 0.224 5.69 0.243 6.17 0.264 6.71 0.286 7.26 0.332 8.43 0.357 9.07 0.401 10.19 0.512 13.
PAGE 25
Xtra-Guard® 1 High Performance 300 V Unshielded, Multipair 20 AWG (0.56 mm2) Stranding: 7/28 (7 x 0.32 mm) Semi-rigid PVC insulation, thickness: 0.016 (0.41 mm) UL CM UL AWM 2464 VW-1 CSA CMG FT4 Part No. Pairs 5282C 5283C 5286C 5289C 5289/12C 2 3 6 9 12 Operating Temperature • 24, 22 AWG: Chart B • 20, 18 AWG: Chart A • Jacket Colors: Nine available (slate standard) Jacket Thickness Inch mm 0.032 0.81 0.032 0.81 0.032 0.81 0.032 0.81 0.032 0.81 18 AWG (0.
PAGE 26
Xtra-Guard® 1 High Performance 300 V Foil Shield, Multipair 28 AWG (0.09 mm2) Stranding: 7/36 (7 x 0.12 mm) Insulation Thickness: 0.010 (0.25 mm) UL CM UL AWM 2464 VW-1 CSA CMG FT4 Part No. Pairs 5938 5939 5940 5941 5942 2 3 4 5 6 Operating Temperature • –35°C to +80°C (AWM) • –35°C to +105°C (CM) Conductor Color Coding • 2 8, 26, 24, 22 AWG: Chart B • 20, 18 AWG: Chart A • Jacket Colors: Nine available (slate standard) Nominal Diameter Inch mm 0.187 4.75 0.196 4.98 0.211 5.36 0.228 5.79 0.
PAGE 27
Xtra-Guard® 1 High Performance 300 V Foil Shield, Multipair 22 AWG (0.35 mm2) Stranding: 7/30 (7 x 0.25 mm) Semi-rigid PVC insulation, thickness: 0.010 (0.25 mm) UL CM UL AWM 2464 VW-1 CSA CMG FT4 Operating Temperature • –35°C to +80°C (AWM) • –35°C to +105°C (CM) Part No. Pairs 5481C 5482C 5483C 5484C 5485C 5486C 5489C 5489/11C 5489/15C 5489/19C 5489/27C 1 2 3 4 5 6 9 11 15 19 27 Nominal Diameter Inch mm 0.172 4.37 0.236 5.99 0.249 6.32 0.271 6.88 0.295 7.49 0.320 8.13 0.372 9.45 0.400 10.16 0.
PAGE 28
Xtra-Guard® 1 High Performance 300 V Supra-Shield® Foil + Braid, Multipair 28 AWG (0.09 mm2) Stranding: 7/36 (7 x 0.12 mm) Insulation Thickness: 0.010 (0.25 mm) UL CM UL AWM 2464 VW-1 CSA CMG FT4 Part No.
PAGE 29
Xtra-Guard® 1 High Performance 300 V Supra-Shield® Foil + Braid, Multipair 22 AWG (0.35 mm2) Stranding: 7/30 (7 x 0.25 mm) Semi-rigid PVC insulation, thickness: 0.010 (0.25 mm) UL CM UL AWM 2464 VW-1 CSA CMG FT4 Operating Temperature • –35°C to +80°C (AWM) • –35°C to +105°C (CM) Part No.
PAGE 30
Xtra-Guard® 1 High Performance 300 V Supra-Shield® Foil + Braid, Multipair 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) UL CM UL AWM 2343 VW-1 CSA CMG FT4 Part No.
PAGE 31
Xtra-Guard® 2 Oil and Abrasion Resistant Polyurethane Features Applications • F ast, easy stripping of insulation and jacket • Color-coded, tinned copper conductors • Specially formulated, rugged polyurethane jacket offering 3x the tear and abrasion resistance of ordinary PVC • Resistance to cut-through and physical damage • 300 V and 600 V • Unshielded, foil shielded, or Supra-Shield® Foil + Braid • Temperature ratings to 90°C (300 V) and 105°C (600 V) • Superior low-temperature flexibility to
PAGE 32
Xtra-Guard® 2 Oil and Abrasion Resistant 300 V Unshielded, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20668 VW-1 CSA AWM I/II A/B FT1 Operating Temperature • –30°C to +90°C Part No. Conductors 25012 25013 25014 25016 25018 25020 25020/15 25020/20 25020/25 2 3 4 6 8 10 15 20 25 Nominal Diameter Inch mm 0.156 3.96 0.163 4.14 0.175 4.45 0.201 5.11 0.215 5.46 0.244 6.20 0.271 6.88 0.300 7.62 0.332 8.43 Jacket Thickness Inch mm 0.032 0.
PAGE 33
Xtra-Guard® 2 Oil and Abrasion Resistant 300 V Unshielded, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.016 (0.41 mm) UL AWM 20668 VW-1 CSA AWM I/II A/B FT1 Operating Temperature • –30°C to +90°C Conductor Color Coding • 24, 22 AWG: Chart E • 20, 18, 16 AWG: Chart D • Jacket Colors: Nine available (black standard) Part No.
PAGE 34
Xtra-Guard® 2 Oil and Abrasion Resistant 600 V Unshielded, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.032 (0.81 mm) UL AWM 20952 VW-1 CSA AWM I/II A/B FT1 Part No. Conductors 25422 25423 25424 25427 25429 25429/12 2 3 4 7 9 12 Nominal Diameter Inch mm 0.352 8.94 0.369 9.37 0.399 10.13 0.466 11.84 0.535 13.59 0.591 15.01 Jacket Thickness Inch mm 0.063 1.60 0.063 1.60 0.063 1.60 0.063 1.60 0.063 1.60 0.063 1.
PAGE 35
Xtra-Guard® 2 Oil and Abrasion Resistant 300 V Foil Shielded, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20668 VW-1 CSA AWM I/II A/B FT1 Operating Temperature • –30°C to +90°C Part No. Conductors 25092 25093 25094 25096 25098 25100 25100/15 25100/20 25100/25 2 3 4 6 8 10 15 20 25 Nominal Diameter Inch mm 0.160 4.06 0.167 4.24 0.179 4.55 0.205 5.21 0.219 5.56 0.248 6.30 0.275 6.99 0.304 7.72 0.336 8.53 Jacket Thickness Inch mm 0.032 0.
PAGE 36
Xtra-Guard® 2 Oil and Abrasion Resistant 300 V Foil Shielded, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.016 (0.41 mm) UL AWM 20668 VW-1 CSA AWM I/II A/B FT1 Operating Temperature • –30°C to +90°C Conductor Color Coding • 24, 22 AWG: Chart E • 20, 18, 16 AWG: Chart D • Jacket Colors: Nine available (black standard) Part No.
PAGE 37
Xtra-Guard® 2 Oil and Abrasion Resistant 600 V Foil Shielded, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.032 (0.81 mm) UL AWM 20952 VW-1 CSA AWM I/II A/B FT1 Operating Temperature • –30°C to +105°C Part No. Conductors 25430/2 25430/3 25430/4 25430/5 25430/7 25430/9 25430/12 25430/15 25430/19 2 3 4 5 7 9 12 15 19 Nominal Diameter Inch mm 0.356 9.04 0.373 9.47 0.403 10.24 0.436 11.07 0.470 11.94 0.539 13.69 0.595 15.11 0.647 16.43 0.690 17.
PAGE 38
Xtra-Guard® 2 Oil and Abrasion Resistant 300 V Supra-Shield® Foil + Braid, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.
PAGE 39
Xtra-Guard® 2 Oil and Abrasion Resistant 300 V Supra-Shield® Foil + Braid, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.016 (0.
PAGE 40
Xtra-Guard® 2 Oil and Abrasion Resistant 600 V Supra-Shield® Foil + Braid, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.032 (0.81 mm) UL AWM 20952 VW-1 CSA AWM I/II A/B FT1 Part No. Conductors 25522 25523 25524 25525 25527 25529 2 3 4 5 7 9 Nominal Diameter Inch mm 0.380 9.65 0.397 10.08 0.427 10.85 0.460 11.68 0.494 12.55 0.563 14.30 Jacket Thickness Inch mm 0.063 1.60 0.063 1.60 0.063 1.60 0.063 1.60 0.063 1.60 0.063 1.
PAGE 41
Xtra-Guard® 2 Oil and Abrasion Resistant 300 V Foil Shield, Multipair 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.
PAGE 42
Xtra-Guard® 2 Oil and Abrasion Resistant 300 V Foil Shield, Multipair 20 AWG (0.56 mm2) Stranding: 7/28 (7 x 0.32 mm) Insulation thickness: 0.016 (0.41 mm) UL AWM 20668 VW-1 CSA AWM I/II A/B FT1 Part No. Pairs 25452 25453 25456 25459 25459/12 25459/15 2 3 6 9 12 15 Nominal Diameter Inch mm 0.302 7.67 0.320 8.13 0.419 10.64 0.491 12.47 0.549 13.94 0.644 16.36 Jacket Thickness Inch mm 0.032 0.81 0.032 0.81 0.032 0.81 0.032 0.81 0.032 0.81 0.053 1.35 Operating Temperature • –30°C to +90°C 18 AWG (0.
PAGE 43
Xtra-Guard® 2 Oil and Abrasion Resistant 300 V Supra-Shield® Foil + Braid, Multipair 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20668 VW-1 CSA AWM I/II A/B FT1 Operating Temperature • –30°C to +90°C Conductor Color Coding Part No. Pairs 25271 25272 25273 25274 25275 25276 25279 25279/11 25279/15 25279/19 1 2 3 4 5 6 9 11 15 19 • 24, 22 AWG: Chart B • 20, 18 AWG: Chart A • Jacket Colors: Nine available (black standard) Nominal Diameter Inch mm 0.
PAGE 44
Xtra-Guard® 2 Oil and Abrasion Resistant 300 V Supra-Shield® Foil + Braid, Multipair 20 AWG (0.56 mm2) Stranding: 7/28 (7 x 0.32 mm) Insulation thickness: 0.016 (0.41 mm) UL AWM 20668 VW-1 CSA AWM I/II A/B FT1 Part No. Pairs 25292 25293 25296 25299 2 3 6 9 Operating Temperature Nominal Diameter Inch mm 0.326 8.28 0.344 8.74 0.443 11.25 0.515 13.08 Jacket Thickness Inch mm 0.032 0.81 0.032 0.81 0.032 0.81 0.032 0.81 18 AWG (0.81 mm2) • –30°C to +90°C Stranding: 16/30 (16 x 0.
PAGE 45
Xtra-Guard® 3 Direct Burial Polyethene Features Applications • T he preferred outdoor cable for direct burial • Resistant to the effects of weathering, moisture, and UV aging without the costly use of conduit • 6x the water resistance of PVC • Specially formulated polyethylene jacket for outstanding service life and ultraviolet light stability in all jacket colors • Fast, easy stripping of insulation and jacket • Color-coded, tinned copper conductors • 300 V and 600 V • Unshielded, foil shielded
PAGE 46
Xtra-Guard® 3 Direct Burial 300 V Unshielded, Multiconductor 22 AWG (0.35 mm2) Stranding: 7/30 (7 x 0.25 mm) Insulation thickness: 0.010 (0.25 mm) Operating Temperature • –30°C to +80°C Conductor Color Coding Part No.
PAGE 47
Xtra-Guard® 3 Direct Burial 300 V Foil Shield, Multiconductor 22 AWG (0.35 mm2) Stranding: 7/30 (7 x 0.25 mm) Insulation thickness: 0.010 (0.
PAGE 48
Xtra-Guard® 3 Direct Burial 300 V Foil Shield, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.016 (0.41 mm) Operating Temperature • – 30°C to +80°C Conductor Color Coding • Chart D • J acket Colors: Nine available (black standard) Part No. Conductors 35382 35383 35384 35386 35388 35390 35390/15 35390/20 35390/25 2 3 4 6 8 10 15 20 25 Nominal Diameter Inch mm 0.229 5.82 0.241 6.12 0.262 6.65 0.309 7.85 0.334 8.48 0.387 9.83 0.434 11.02 0.485 12.32 0.
PAGE 49
Xtra-Guard® 3 Direct Burial 600 V Foil Shield, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.032 (0.81 mm) Operating Temperature • –30°C to +80°C Part No. Conductors 35430/2 35430/3 35430/5 35430/7 35430/9 35430/12 2 3 5 7 9 12 Nominal Diameter Inch mm 0.355 9.02 0.372 9.45 0.434 11.02 0.468 11.89 0.537 13.64 0.594 15.09 Jacket Thickness Inch mm 0.063 1.60 0.063 1.60 0.063 1.60 0.063 1.60 0.063 1.60 0.063 1.
PAGE 50
Xtra-Guard® 3 Direct Burial 300 V Supra-Shield® Foil + Braid, Multiconductor 22 AWG (0.35 mm2) Part No. Operating Temperature • –30°C to +80°C Conductor Color Coding • 2 2 AWG: Chart E • 20, 18, 16 AWG: Chart D • Jacket Colors: Nine available (black standard) Materials • S tranded tinned copper conductors • Premium PVC insulation • Specially formulated polyethylene jacket • U V resistant • Supra-Shield foil + braid shield: Aluminum/polyester/aluminum foil with 25% overlap min.
PAGE 51
Xtra-Guard® 3 Direct Burial 300 V Foil Shield, Multipair 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) Operating Temperature Part No. Pairs 35491 35492 35493 35494 1 2 3 4 Nominal Diameter Inch mm 0.159 4.04 0.215 5.46 0.227 5.77 0.246 6.25 Jacket Thickness Inch mm 0.032 0.81 0.032 0.81 0.032 0.81 0.032 0.
PAGE 52
Xtra-Guard® 3 Direct Burial 300 V Supra-Shield® Foil + Braid, Multipair 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) Part No. Pairs 35272 2 Operating Temperature • C hart B • Jacket Colors: Nine available (black standard) Materials • S tranded tinned copper conductors • Premium PVC insulation • Specially formulated polyethylene jacket • UV resistant • Supra-Shield foil + braid shield: Aluminum/polyester/aluminum foil with 25% overlap min.
PAGE 53
Xtra-Guard® 4 Advanced High/Low-Temperature Performance TPE Features • T he preferred outdoor cable for advanced temperature performance • Temperature range from -50°C to +125°C • High-performance TPE insulation and jacket offering 3x the low-temperature flexibility of conventional PVC • Solvent and water resistant • Fast, easy stripping of insulation and jacket • Color-coded, tinned copper conductors • 300 V and 600 V • Unshielded, foil shielded, or Supra-Shield® Foil + Braid • Outstanding ultrav
PAGE 54
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 300 V Unshielded, Multiconductor 24 AWG (0.23 mm2)* Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.016 (0.41 mm) UL AWM 20237 UL PLTC* CSA AWM I/II A/B FT1 MSHA P-07-KA070017-MSHA NEC Class 1, Div 2 (22 & 20 AWG) Part No. Conductors 45012 45013 45014 45016 45018 45020 45020/15 45020/20 45020/25 2 3 4 6 8 10 15 20 25 22 AWG (0.
PAGE 55
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 300 V Unshielded, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.016 (0.41 mm) UL AWM 20237 UL PLTC CSA AWM I/II A/B FT1 MSHA P-07-KA070017-MSHA NEC Class 1, Div 2 Operating Temperature • –50°C to +125°C Part No. Conductors 45062 45062/1* 45063 45063/1* 45064 45066 45068 45070 45070/15 45070/20 45070/25 2 2 3 3 4 6 8 10 15 20 25 Nominal Diameter Inch mm 0.252 6.40 0.252 6.40 0.264 6.71 0.264 6.71 0.
PAGE 56
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 600 V Unshielded, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.032 (0.81 mm) UL AWM 20238 UL TC, WTTC CSA AWM I/II A/B FT1 MSHA P-07-KA070017-MSHA NEC Class 1, Div 2 Part No. Conductors 45422 45423 45424 45425 45427 45429 2 3 4 5 7 9 Stranding: 19/0.0117 (19 x 0.29 mm) Insulation thickness: 0.032 (0.
PAGE 57
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 300 V Foil Shielded, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.016 (0.41 mm) UL AWM 20237 UL PLTC* CSA AWM I/II A/B FT1 MSHA P-07-KA070017-MSHA NEC Class 1, Div 2 (22 & 20 AWG) Part No. Conductors 45092 45093 45094 45096 45098 45100 45100/15 45100/20 45100/25 2 3 4 6 8 10 15 20 25 22 AWG (0.35 mm2) • –50°C to +125°C Stranding: 7/30 (7 x 0.25 mm) Insulation thickness: 0.016 (0.
PAGE 58
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 300 V Foil Shielded, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.016 (0.41 mm) UL AWM 20237 UL PLTC CSA AWM I/II A/B FT1 MSHA P-07-KA070017-MSHA NEC Class 1, Div 2 Operating Temperature • –50°C to +125°C Conductor Color Coding Part No.
PAGE 59
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 600 V Foil Shielded, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.032 (0.81 mm) UL AWM 20238 UL TC, WTTC CSA AWM I/II A/B FT1 MSHA P-07-KA070017-MSHA NEC Class 1, Div 2 Part No. Conductors 45430/2 45430/3 45430/4 45430/5 45430/7 45430/9 45430/12 2 3 4 5 7 9 12 Stranding: 19/0.0117 (19 x 0.29 mm) Insulation thickness: 0.032 (0.
PAGE 60
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 300 V Supra-Shield® Foil + Braid, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.016 (0.41 mm) UL AWM 20237 UL PLTC CSA AWM I/II A/B FT1 MSHA P-07-KA070017-MSHA NEC Class 1, Div 2 (22 & 20 AWG) Part No.
PAGE 61
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 300 V Supra-Shield® Foil + Braid, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.016 (0.
PAGE 62
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 600 V Supra-Shield® Foil + Braid, Multiconductor 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.032 (0.81 mm) UL AWM 20238 UL TC, WTTC CSA AWM I/II A/B FT1 MSHA P-07-KA070017-MSHA NEC Class 1, Div 2 Part No.
PAGE 63
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 300 V Unshielded, Multipair 18 AWG (0.81 mm2) Stranding: 16/30 (16 x 0.25 mm) Insulation thickness: 0.016 (0.41 mm) Part No. Pairs 45031 45032 1 2 Nominal Diameter Inch mm 0.252 6.40 0.353 8.97 Jacket Thickness Inch mm 0.045 1.14 0.045 1.
PAGE 64
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 300 V Foil Shield, Multipair 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.016 (0.
PAGE 65
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 300 V Foil Shield, Multipair 20 AWG (0.56 mm2) Stranding: 7/28 (7 x 0.32 mm) Insulation thickness: 0.016 (0.
PAGE 66
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 300 V Supra-Shield® Foil + Braid, Multipair 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.016 (0.
PAGE 67
Xtra-Guard® 4 Advanced High/Low-Temperature Performance 300 V Supra-Shield® Foil + Braid, Multipair 20 AWG (0.56 mm2) Stranding: 7/28 (7 x 0.32 mm) Insulation thickness: 0.016 (0.41 mm) UL AWM 20237 UL PLTC CSA AWM I/II A/B FT1 MSHA P-07-KA070017-MSHA NEC Class 1, Div 2 (22 AWG) Part No.
PAGE 68
Xtra-Guard® 5 Maximum Temperature and Chemical Performance FEP Features Applications • T he preferred cable for unsurpassed maximum temperature and chemical performance • Temperature range from -80°C to +200°C • UL, CSA listed • 100% impervious to all chemicals, solvents, acids, fuels, and water • Suitable for Class 1 cleanrooms • FDA food/medical grade (sterilizable) • Low-friction FEP jacket for easy routing • Color-coded, tinned copper conductors • 300 V • Unshielded, foil shielded, or Supra
PAGE 69
Xtra-Guard® 5 Maximum Temperature and Chemical Performance 300 V Unshielded, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20229 UL CMP CSA CMP FT6 Part No.
PAGE 70
Xtra-Guard® 5 Maximum Temperature and Chemical Performance 300 V Unshielded, Multiconductor 18 AWG (0.90 mm2) Stranding: 7/26 (7 x 0.40 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20229 UL CMP CSA CMP FT6 Part No. Conductors 55062 55063 55064 55066 55069 55070/12 2 3 4 6 9 12 Operating Temperature • C hart E • Jacket Tints: Nine available (Tan standard) Materials • S tranded tinned copper conductors • FEP insulation • FEP jacket • Aramid fiber ripcord Jacket Thickness Inch mm 0.027 0.
PAGE 71
Xtra-Guard® 5 Maximum Temperature and Chemical Performance 300 V Foil Shielded, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20229 UL CMP CSA CMP FT6 Part No. Conductors 55092 55093 55094 55096 55099 55100/12 2 3 4 6 9 12 Nominal Diameter Inch mm 0.154 3.91 0.161 4.09 0.172 4.37 0.199 5.05 0.226 5.74 0.249 6.32 Jacket Thickness Inch mm 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.69 Operating Temperature 22 AWG (0.
PAGE 72
Xtra-Guard® 5 Maximum Temperature and Chemical Performance 300 V Foil Shielded, Multiconductor 18 AWG (0.90 mm2) Stranding: 7/26 (7 x 0.40 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20229 UL CMP CSA CMP FT6 Part No.
PAGE 73
Xtra-Guard® 5 Maximum Temperature and Chemical Performance 300 V Supra-Shield® Foil + Braid, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20229 UL CMP CSA CMP FT6 Part No.
PAGE 74
Xtra-Guard® 5 Maximum Temperature and Chemical Performance 300 V Supra-Shield® Foil + Braid, Multiconductor 18 AWG (0.90 mm2) Stranding: 7/26 (7 x 0.40 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20229 UL CMP CSA CMP FT6 Part No.
PAGE 75
Xtra-Guard® 5 Maximum Temperature and Chemical Performance 300 V Unshielded, Multipair 22 AWG (0.35 mm2) Stranding: 7/30 (7 x 0.25 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20229 UL CMP CSA CMP FT6 Part No. Pairs 55021 55022 55023 55026 55029 55029/12 1 2 3 6 9 12 Nominal Diameter Inch mm 0.160 4.06 0.224 5.69 0.237 6.02 0.307 7.80 0.358 9.09 0.401 10.19 Jacket Thickness Inch mm 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.
PAGE 76
Xtra-Guard® 5 Maximum Temperature and Chemical Performance 300 V Foil Shield, Multipair 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20229 UL CMP CSA CMP FT6 Part No. Pairs 55491 55492 55493 55496 55499 55499/11 1 2 3 6 9 11 Nominal Diameter Inch mm 0.154 3.91 0.210 5.33 0.222 5.64 0.284 7.21 0.329 8.36 0.355 9.02 Jacket Thickness Inch mm 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.69 Operating Temperature 22 AWG (0.
PAGE 77
Xtra-Guard® 5 Maximum Temperature and Chemical Performance 300 V Supra-Shield® Foil + Braid, Multipair 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.25 mm) UL AWM 20229 UL CMP CSA CMP FT6 Part No. Pairs 55271 55272 55273 55276 55279 55279/12 1 2 3 6 9 12 Nominal Diameter Inch mm 0.176 4.47 0.232 5.89 0.244 6.20 0.306 7.77 0.351 8.92 0.388 9.86 Jacket Thickness Inch mm 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.69 0.027 0.69 Operating Temperature 22 AWG (0.
PAGE 78
Xtra-Guard® Flex Cable Long Lasting Performance Meet a wide range of flexing needs with Xtra-Guard Flex cables, from light flexing to continuous multiaxis flexing. These long-lasting flexible cables are designed to provide Application excellent performance in highflex, high torsion, and continuous flex applications, such as motion control and robotics.
PAGE 79
Xtra-Guard® Flex Cable Flexible/Flexing Xtra-Guard cables are available in a variety of configurations to allow exactly the right cable to be selected for your flexing application.
PAGE 80
Xtra-Guard® Standard Flex Control Cable Light to Moderate Flex Applications 600 V Unshielded, Multiconductor 26 AWG (0.14 mm2) Stranding: 7/34 (7 x 0.16 mm) Insulation thickness: 0.022 (0.56 mm) UL AWM 2587 CSA AWM I/II A/B FT1 CE Part No.
PAGE 81
Xtra-Guard® Standard Flex Control Cable Light to Moderate Flex Applications 600 V Unshielded, Multiconductor 20 AWG (0.51 mm2) Stranding: 10/30 (10 x 0.25 mm) Insulation thickness: 0.022 (0.
PAGE 82
Xtra-Guard® Standard Flex Control Cable Light to Moderate Flex Applications 600 V Unshielded, Multiconductor 14 AWG (2.08 mm2) Stranding: 41/30 (41 x 0.25 mm) Insulation thickness: 0.022 (0.
PAGE 83
Xtra-Guard® Standard Flex Control Cable Light to Moderate Flex Applications 600 V Unshielded, Multiconductor 6 AWG (13.44 mm2) Stranding: 105/26 (105 x 0.40 mm) Insulation thickness: 0.047 (1.19 mm) Part No.
PAGE 84
Xtra-Guard® Standard Flex Control Cable Light to Moderate Flex Applications 600 V Shielded, Multiconductor 26 AWG (0.14 mm2) Stranding: 7/34 (7 x 0.16 mm) Insulation thickness: 0.022 (0.
PAGE 85
Xtra-Guard® Standard Flex Control Cable Light to Moderate Flex Applications 600 V Shielded, Multiconductor 20 AWG (0.51 mm2) Stranding: 10/30 (10 x 0.25 mm) Insulation thickness: 0.022 (0.
PAGE 86
Xtra-Guard® Standard Flex Control Cable Light to Moderate Flex Applications 600 V Shielded, Multiconductor Availability 100 ft (30.
PAGE 87
Xtra-Guard® Standard Flex Control Cable Light to Moderate Flex Applications 600 V Shielded, Multiconductor Availability 100 ft (30.
PAGE 88
Xtra-Guard® Continuous Flex Control C-Track or High Flexing Applications Up to 14 Million Flex Life Cycles 600 V Unshielded, Multiconductor 20 AWG (0.51 mm2) Stranding: 63/38 (63 x 0.10 mm) Insulation thickness: 0.022 (0.
PAGE 89
Xtra-Guard® Continuous Flex Control C-Track or High Flexing Applications Up to 14 Million Flex Life Cycles 600 V Unshielded, Multiconductor Availability 100 ft (30.
PAGE 90
Xtra-Guard® Continuous Flex Control C-Track or High Flexing Applications Up to 14 Million Flex Life Cycles 600 V Shielded, Multiconductor 26 AWG (0.14 mm2) Stranding: 19/38 (19 x 0.10) Insulation thickness: 0.022 (.56 mm) UL AWM 2587 CSA AWM I/II A/B FT1 CE Part No.
PAGE 91
Xtra-Guard® Continuous Flex Control C-Track or High Flexing Applications Up to 14 Million Flex Life Cycles 600 V Shielded, Multiconductor 20 AWG (0.51 mm2) Stranding: 63/38 (63 x 0.10 mm) Insulation thickness: 0.022 (0.
PAGE 92
Xtra-Guard® Continuous Flex Control C-Track or High Flexing Applications Up to 14 Million Flex Life Cycles 600 V Shielded, Multiconductor Availability 100 ft (30.
PAGE 93
Xtra-Guard® Continuous Flex Data C-Track or High Flexing Applications Up to 6 Million Flex Life Cycles 300 V Unshielded, Multiconductor 28 AWG (0.09 mm2) Stranding: 7/36 (7 x 0.13 mm) Insulation thickness: 0.010 (0.25 mm) UL CM UL AWM 2661 CSA AWM I/II A/B FT4 CSA CMG CE Part No.
PAGE 94
Xtra-Guard® Continuous Flex Data C-Track or High Flexing Applications Up to 6 Million Flex Life Cycles 300 V Foil/Spiral Shield, Multiconductor 20 AWG (0.56 mm2) Stranding: 19/32 (19 x 0.20 mm) Insulation thickness: 0.01 (0.25 mm) UL CM UL AWM 2661 CSA AWM I/II A/B FT4 CSA CMG CE Part No. Conductors 862002 862003 862004 862005 862007 862012 2 3 4 5 7 12 Conductor Color Coding • C hart D • Jacket color: slate Stranding: 41/34 (41 x 0.16 mm) Insulation thickness: 0.01 (0.25 mm) Part No.
PAGE 95
Xtra-Guard® Continuous Flex Data C-Track or High Flexing Applications Up to 6 Million Flex Life Cycles 300 V Foil/Spiral Shield, Multiconductor 28 AWG (0.09 mm2) Stranding: 7/36 (7 x 0.13 mm) Insulation thickness: 0.010 (0.25 mm) UL CM UL AWM 2661 CSA AWM I/II A/B FT4 CSA CMG CE Part No.
PAGE 96
Xtra-Guard® Continuous Flex Data C-Track or High Flexing Applications Up to 6 Million Flex Life Cycles 300 V Foil + Braid Shield, Multipair 28 AWG (0.09 mm2) Stranding: 7/36 (7 x 0.13 mm) Insulation thickness: 0.010 (0.25 mm) UL CM UL AWM 2661 CSA AWM I/II A/B FT4 CSA CMG CE Part No.
PAGE 97
Xtra-Guard® Continuous Flex Data C-Track or High Flexing Applications Up to 6 Million Flex Life Cycles 300 V Foil + Braid Shield, Multipair 20 AWG (0.56 mm2) Stranding: 19/32 (19 x 0.20 mm) Insulation thickness: 0.01 (0.25 mm) UL CM UL AWM 2661 CSA AWM I/II A/B FT4 CSA CMG CE Part No.
PAGE 98
Xtra-Guard® Continuous Flex Data C-Track or High Flexing Applications Up to 6 Million Flex Life Cycles 300 V Foil + Braid Shield, Multipair 24 AWG (0.20 mm2) Stranding: 10/34 (10 x 0.16 mm) Insulation thickness: 0.010 (0.25 mm) UL CM UL AWM 2661 CSA AWM I/II A/B FT4 CSA CMG CE Part No. Pairs 86601CY 86602CY 86603CY 86604CY 86605CY 86606CY 86608CY 86610CY 86614CY 1 2 3 4 5 6 8 10 14 Nominal Diameter Inch mm 0.204 5.18 0.260 6.60 0.272 6.91 0.292 7.42 0.314 7.98 0.337 8.56 0.385 9.78 0.427 10.85 0.
PAGE 99
Xtra-Guard® Torsional Flex Torsional Cable with 360° Twisting 600 V Unshielded, Multiconductor 20 AWG (0.56 mm2) Stranding: 19/32 (19 x 0.20 mm) Insulation thickness: 0.01 (0.25 mm) UL AWM 20234 CSA AWM I/II A/B FT1 CE Part No.
PAGE 100
Xtra-Guard® Torsional Flex Torsional Cable with 360° Twisting 600 V Unshielded, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.016 (0.
PAGE 101
Xtra-Guard® Torsional Flex Torsional Cable with 360° Twisting 600 V Unshielded, Multiconductor 16 AWG (1.32 mm2) Stranding: 19/0.0117 (19 x 0.30 mm) Insulation thickness: 0.016 (0.
PAGE 102
Xtra-Guard® Torsional Flex Torsional Cable with 360° Twisting 600 V Shielded, Multiconductor 24 AWG (0.23 mm2) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.016 (0.
PAGE 103
Xtra-Guard® Torsional Flex Torsional Cable with 360° Twisting 600 V Shielded, Multiconductor 16 AWG (1.32 mm2) Stranding: 19/0.0117 (19 x 0.30 mm) Insulation thickness: 0.016 (0.
PAGE 104
Xtra-Guard® Industrial Ethernet Cable Rugged Connectivity for Industrial Networking 300 V, Cat 5e, Unshielded Polypropylene Insulation 24 AWG (0.23 mm2 Stranded/0.21 mm2 Solid) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.008 (0.20 mm) ANSI/TIA-568-C.2 Cat 5e UL CMR UL 1666 CSA FT-4 Part No. Pairs Conductors 75020 76020 75010 76010 2 4 2 4 Stranded Stranded Solid Solid Jacket Thickness Inch mm 0.035 0.89 0.035 0.89 0.035 0.89 0.035 0.89 FEP Insulation 24 AWG (0.23 mm2 Stranded/0.
PAGE 105
Xtra-Guard® Industrial Ethernet Cable Rugged Connectivity for Industrial Networking 300 V, Cat 5e, Foil Shielded Polypropylene Insulation 24 AWG (0.23 mm2 Stranded/0.21 mm2 Solid) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.010 (0.24 mm) ANSI/TIA-568-C.2 Cat 5e UL CMR UL 1666 CSA FT-4 Part No. Pairs Conductors 75021 76021 75011 76011 2 4 2 4 Stranded Stranded Solid Solid Jacket Thickness Inch mm 0.035 0.89 0.035 0.89 0.035 0.89 0.035 0.89 FEP Insulation 24 AWG (0.23 mm2 Stranded/0.
PAGE 106
Xtra-Guard® Industrial Ethernet Cable Rugged Connectivity for Industrial Networking 600 V, Cat 5e, Supra-Shield® Foil + Braid Polypropylene Insulation 24 AWG (0.23 mm2 Stranded/0.21 mm2 Solid) Stranding: 7/32 (7 x 0.20 mm) Insulation thickness: 0.014 (0.36 mm) ANSI/TIA-568-C.2 Cat 5e UL CMR UL 1666 CSA FT-4 Part No. Pairs Conductors 75022 76022 75012 76012 2 4 2 4 Stranded Stranded Solid Solid Jacket Thickness Inch mm 0.035 0.89 0.035 0.89 0.035 0.89 0.035 0.89 FEP Insulation 24 AWG (0.
PAGE 107
Conductor Color Coding Multipair Cables Chart A Pair No. Color Combination Pair No. Color Combination Pair No.
PAGE 108
Conductor Color Coding Multiconductor Cables Chart D No.
PAGE 109
Cables you trust. Service you deserve. Every application is critical and cable failure is not an option when the safety of equipment and personnel is paramount. Specify Alpha cable for rugged, reliable performance, since the integrity of your system is only as robust as the products you use. GLOBAL HEADQUARTERS 711 Lidgerwood Avenue Elizabeth, NJ 07207-0711 USA Toll Free: 1-800-52 ALPHA Tel: 1-908-925-8000 Fax: 1-908-925-5411 E-mail: info@alphawire.