Datasheet

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com
Customer Specification
PART NO. 2841/7
Construction
Diameters (In)
1) Component 1 1 X 1 HOOKUP
a) Conductor 30 (7/38) AWG SPC 0.012
b) Insulation 0.006" Wall, Nom. PTFE 0.024+/- 0.002
(1) Color(s)
WHITE, BLACK, RED, GREEN, YELLOW, BLUE, BROWN
ORANGE, SLATE, VIOLET
Applicable Specifications
1) Military MIL-W-16878/6 (Type ET)
2) Other NEMA HP3-ETXBBB
Environmental
1) EU Directive 2011/65/EU(RoHS2):
All materials used in the manufacture of this part are in compliance with European Directive
2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and
electronic equipment. Consult Alpha Wire's web site for RoHS C of C.
2) REACH Regulation (EC 1907/2006):
This product does not contain Substances of Very High Concern (SVHC) listed on the European
Union's REACH candidate list in excess of 0.1% mass of the item. For up-to-date information,
please see Alpha's REACH SVHC Declaration.
3) California Proposition 65:
The outer surface materials used in the manufacture of this part meet the requirements of
California Proposition 65.
Properties
Physical & Mechanical Properties
1) Temperature Range -60 to 200°C
2) Bend Radius 10X Cable Diameter
3) Pull Tension 0.88 Lbs, Maximum
Electrical Properties (For Engineering purposes only)
1) Voltage Rating
250 V
RMS
2) Inductance 0.06 µH/ft, Nominal
3) Conductor DCR 94 Ω/1000ft @20°C, Nominal
Other