Datasheet

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

Customer Specification

PART NO. 2152

Construction

1) Conductor

a) Material Tinned Copper, per ASTMB-33 and CID-A-A-59551

b) Stranding Solid

c) Diameter 0.0063"

2) Braid Data

a) Nominal ID 25/32

b) AWG of Ends 34

c) Number of Carriers 48

d) Nominal Percent Coverage 95

e) Total Number of Ends 528

f) Approx. Equiv. AWG 7

g) Approx. Ampacity 85 Amps

h) Federal Spec Number N/A

Applicable Specifications

1) DSCC CID A-A-59569A

Environmental

1) EU Directive 2011/65/EU(RoHS2):

All materials used in the manufacture of this part meet the requirements of European Directive

2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and

electronic equipment. No Exemptions are required for RoHS Compliance on this item. Consult

Alpha Wire's web site for RoHS C of C.

2) REACH Regulation (EC 1907/2006):

This product does not contain any of the 16 substances listed on the European Union's REACH

Substance of Very High Concern (SVHC) candidate list in excess of 0.1% mass of the item.

3)California Proposition 65:

The outer surface materials used in the manufacture of this part meet the requirements of

California Proposition 65.

Other

1) Packaging

a) 100 ft. 9 x 4.5 x 3.5, Continuous

b) 500 ft. 12 x 6 x 3.5, 3 Pieces Max., 25 ft. Min. Length

Spool size may vary slightly

www.alphawire.com

PAGE 1
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Customer Specification PART NO. 2152 Construction 1) Conductor a) Material Tinned Copper, per ASTMB-33 and CID-A-A-59551 b) Stranding Solid c) Diameter 0.0063" 2) Braid Data a) Nominal ID 25/32 b) AWG of Ends 34 c) Number of Carriers 48 d) Nominal Percent Coverage 95 e) Total Number of Ends 528 f) Approx. Equiv. AWG 7 g) Approx.
PAGE 2
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742) Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure their accuracy at the time of publication, information and specifications described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not ensure product availability.
PAGE 3
EU/China ROHS CERTIFICATE OF COMPLIANCE To Whom It May Concern: Alpha Wire Part Number: 2152 2152, RoHS-Compliant Commencing With 1/1/2004 Production Note: all colors and put-ups This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use of certain hazardous substances used in the manufacture of electrical and electroni