Datasheet
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com
Customer Specification
PART NO. 1233/2
Construction
1) Conductor
a) Material Tinned Copper, per ASTMB-33 and CID-A-A-59551
b) Stranding Solid
2) Braid Data
a) Nominal Dimensions .500 x .030 Inches
b) AWG of Ends 36
c) Number of Carriers 48
d) Nominal Percent Coverage N/A
e) Total Number of Ends 384
f) Approx. Equiv. AWG 10
g) Approx. Ampacity 53 Amps
h) Federal Spec Number N/A
Applicable Specifications
1) DSCC CID A-A-59569A
Environmental
1) EU Directive 2011/65/EU(RoHS2):
All materials used in the manufacture of this part meet the requirements of European Directive
2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and
electronic equipment. No Exemptions are required for RoHS Compliance on this item. Consult
Alpha Wire's web site for RoHS C of C.
2) REACH Regulation (EC 1907/2006):
This product does not contain any of the 16 substances listed on the European Union's REACH
Substance of Very High Concern (SVHC) candidate list in excess of 0.1% mass of the item.
3) California Proposition 65:
The outer surface materials used in the manufacture of this part meet the requirements of
California Proposition 65.
Other
1) Packaging
a) 100 ft. 9 x 4.5 x 3.5, Continuous
b) 500 ft. 9 x 4.5 x 3.5, 3 Pieces Max., 25 ft. Min. Length
c) 1000 ft. 12 x 6 x 3.5, 4 Pieces Max., 25 ft. Min Length
Spool size may vary slightly