Datasheet

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com
Customer Specification
PART NO. 1221
Construction
1) Conductor
a) Material Tinned Copper, per ASTMB-33 and CID-A-A-59551
b) Stranding Solid
2) Braid Data
a) Nominal Dimensions .025 x .015 Inches
b) AWG of Ends 36
c) Number of Carriers 8
d) Nominal Percent Coverage N/A
e) Total Number of Ends 8
f) Approx. Equiv. AWG 27
g) Approx. Ampacity 4 Amps
h) Federal Spec Number N/A
Applicable Specifications
1) DSCC CID A-A-59569A
Environmental
1) EU Directive 2011/65/EU(RoHS2):
All materials used in the manufacture of this part meet the requirements of European Directive
2011/65/EU regarding the restriction of use of certain hazardous substances in electrical and
electronic equipment. No Exemptions are required for RoHS Compliance on this item. Consult
Alpha Wire's web site for RoHS C of C.
2) REACH Regulation (EC 1907/2006):
This product does not contain any of the 16 substances listed on the European Union's REACH
Substance of Very High Concern (SVHC) candidate list in excess of 0.1% mass of the item.
3) California Proposition 65:
The outer surface materials used in the manufacture of this part meet the requirements of
California Proposition 65.
Other
1) Packaging
a) 100ft. 2.75 x 1 x 1-1/8, Continuous
b) 500 ft. 2.75 x 2 x 1-1/8, 3 Pieces Max., 50 ft. Min. Length
c) 1000 ft. 3.5 x3 x 1-1/8, 4 Pieces Max., 50 ft. Min Length
Spool size may vary slightly

Summary of content (3 pages)