Manual
87
0700015-J0 Rev B
6.7.4 ADIO Device Configuration (Web Interface Only)
The Supervisor can modify the name of the signal or configure an alarm for the selected item. Some
examples are shown below.
NOTE:
Alarm conguration/programming for the 4R/8D device is in the custom alarm sections of the menus;
where the alarm condition can be associated with a digital input and mapped to a relay.
Figure 101 — ADIO Device Configuration web interface window (showing 4R/8D device)
Select and modify the name
of the desired channel, then
apply changes or select back
Figure 102 — Input Name Assignment web interface window (showing 4R/8D device)
Select the device be-
fore accessing Modify
Name button
Once the device is
highlighted, select
Modify Name
Congure Alarms is not
an option for the 4R/8D
device. See note below.