Manual

0700015-J0 Rev B

6.7.2.2 Analog Inputs

Refer to section 6 .7.1 for an overview of analog input channels.

6.7. 2. 3 Digital Inputs

Select this heading from the pull-down menu to access a list of all the existing digital channels, see

6.6.4.2 for Alarms. The status of the channel, high or low, is displayed in the column next to the channel

name. (Web: Main Menu > Signals > View Live Status)

6.7. 2.4 Rectiﬁer Signals

Select this heading from the pull-down menu to access a list of all the existing rectiﬁer signals. The status

of the signal is displayed in the column next to the signal name.

AC Mains Voltage Correction – provides the means to apply a correction factor to the reading coming

from the rectiﬁer. Each AC input phase and the combined average AC voltage have correction factors.

6.7. 2. 5 Custom Signals

NEW FEATURE

This software version includes an additional 10 custom signals for a total of 20. See "2.13

Signals Management" on page 75.

For the web interface, select the unit text string from the drop down menu that represents the units value,

e.g., ±V, AH, mm, etc.

Select Set by SNMP or Set By Equation.

Figure 75 — AC mains voltage correction via web interface

Figure 76 — Signals – Custom Signals