Manual
Visit the Alpha website at www.alpha.ca for the latest manual and product downloads
Alpha Technologies Ltd. 034-136-C0 Rev B WC
Printed in Canada. © 2010 Alpha Technologies Ltd. ALPHA and CORDEX are trademarks of Alpha Technologies Ltd. All Rights Reserved. Page 109 of 122
11 Factory Ranges and Defaults
Submenu Item Programmable Range Default Setting
12Vdc 24Vdc 48Vdc 125Vdc 220Vdc
Float (FL) Voltage 0-9999999999 13.50V 27.00V 54.00V 130.50V 229.5V
Equalize (EQ) Voltage 0-9999999999 13.75V 27.50V 55.00V 132.92V 233.75V
Battery Test (BT) Voltage 0-9999999999 11.50V 22.00V 44.00V 106.33V 187.00V
OVP 0-9999999999 14.25V 29.00V 57.00V 137.75V 242.25V
LVA 0-9999999999 11.00V 22.00V 44.00V 106.33V 187.00V
HVA 0-9999999999 14.00V 28.00V 55.50V 134.13V 235.88V
Current Limit (CL) 0-9999999999 100%
Power Limit (PL) 0-9999999999 100%
Equalize Timeout 0-9999999999 30 hours
Battery Test Duration 0-9999999999 8.0 hours
Slope (Adjust) 0-9999999999 1.00%
Backlight Timeout 0-32767 1 minute
Security Code 0-32767 123
Module Start Delay 0-32767 1 second
System Start Delay 0-32767 0 seconds
Soft Start Ramp Rate Normal/Fast Normal
Temp Display Scale Celsius/Fahrenheit Celsius
Current/Power Limit Alarm Enable/Disable Disable
Remote Shutdown Enable/Disable Enable
Local Access Alarm Enable/Disable Enable
Ramp Test Enable/Disable Enable
Power Save Enable/Disable Disable
Redundant Rectifiers 0-32767 1
Maximum Power Usage 0-32767 80%
Table E–Rectifiers menu defaults
Submenu Item Programmable Range Default Setting
Load Voltage (V1) Decimal precision: 0-3 2
Load Current (I1) Decimal precision: 0-3 1
Battery Voltage (V2) Decimal precision: 0-3 2
Battery Current (I2) Decimal precision: 0-3 1
AC Mains Decimal precision: 0-3 1
Battery Temperature Decimal precision: 0-3 2
Temp Comp Sensor 1 Enable/Disable Disable
Temp Comp Sensor 2 Enable/Disable Disable
Temp Comp Sensor 3 (GP1) Enable/Disable Disable
Temp Comp Sensor 4 (GP2) Enable/Disable Disable
Battery Runtime Decimal precision: 0-3 2
Battery Capacity Decimal precision: 0-3 1
Battery Depth of Discharge (DOD) Decimal precision: 0-3 1
Analog Inputs See 6.6.1.1 N/A
Digital Inputs (1-8) High/Low Low
Rectifier Signals See Menu Tree N/A
Custom Signals (1-10) Decimal precision: 0-3 2
Signal Units (1-10)
A, V, W, C (F)
V
Table F–Signals menu defaults