Service manual

BRAVE Steel – User and service manual 43
Parameter
Value
Meaning
Basic
44
xxxx
Service password (0000-9999)
0000
xxxx – service password to programme from a phone (DTMF)
If you forget the password, the following procedure is recommended:
1. Open the Brave front cover;
2. Switch „DIP 1‟ to „ON‟;
3. Call the Brave;
4. Once the Brave picks up the system is in programming regime. In
this regime it is possible to change the password 44xxxx;
5. Switch „DIP 1‟ to „OFF‟; and
6. Close the front cover.
Parameter
Value
Meaning
Basic
45
dd
Command for switch over to DAY
(00-99,*0-*9)
11
46
nn
Command for switchover to NIGHT
(0099,*0-*9)
10
Dd command to switch over to the DAY regime [2 spaces] /
1
Nn command to switch over to the NIGHT regime [2 spaces] /
1
/
1
command is always 2 digits, but if you wish to switch over from Day to
Night with a single digit from the phone, there is an option to input "*a",
where a is a single number and the star represents an empty space and
must be in the first place (e.g. parameters 35,36)
Note. The Day/Night switch over regime stays set following line disconnection.
Parameter
Value
Meaning
Basic
47
e
Regime system choice (0/1)
1
e – Choice of regime numbers; e=0 selects numbers from first and second
group, e=1 selects numbers in accordance with the Day/Night regime.
WARNING !! setting this parameter materially affects the number dialling!
Parameter
Value
Meaning
Basic
48
c
Keyboard connection (0-8)
0
c – c=0 connecting the NC-mod to the basic module only
c=1 - 8 keyboard connected to the first to eight place
WARNING !! setting this parameter materially affects whole systems
function!