Service manual

42 BRAVE Steel – User and service manual
5.3 Basic parameters
Parameter
Value
Meaning
Basic
41
v
Type of choice v – time/impulse
(0/1)
0
v – type of choice v=0 is DTMF tone choice, v=1 is impulse choice
Parameter
Value
Meaning
Basic
42
z
Sign for call prolonging (* / #)
*
z – sign for prolonging a call * or # (10secs. before the end of the call the
Brave sends signal, after pressing this the Brave prolongs the call)
Parameter
Value
Meaning
Basic
43
g bb
Command for disconnecting Brave from
the phone (00-
99,*0-*9)
155 266
g – Command order [1-2] (there are 2 to disconnect the Brave from both
relays)
bb – Command for disconnecting the Brave from the phone [2 spaces]
/
1
It is advantageous to set the same command for relay switching on
(parameter 35,36) and command for the Brave disconnection aa=bb or
aa=cc.
/
1
– command is always 2 digits, but if you wish to control relay with a single
digit from the phone, there is an option to input "*a", where a is a single
number and the star represents an empty space and must be in the first
place (e.g. at parameters 35,36).