Service manual

BRAVE Steel – User and service manual 37
m=7 permanent switch on / off – only for version (C) for switching (DIP 3, 4).
With command for 1 impulse it is switched on, for impulse 2 is off. The
system remembers its state even after the line is disconnected. This
regime is used for watering, green house opening, switching on heating
etc.
m=8 switching depends on setting Day/Night – only for version (C) for
switching (DIP 3, 4). Version (LC) enables only copying of manual
switching Day/Night, but version (C) enables copying of times from the
weekly table (if it is on - parameter 084) and it is possible to use it for
example switching on heating etc.
Parameter
Value
Meaning
Basic
31
r* tt
button tt switches on relay r in regime m=6
(01-99)
01
r – relay number [1-2]
tt – button number (memory), always in two digits [01-99]
This parameter is only for relay regime m=6. Value tt determines which button
starts switching on for time t1/t4 of relay r.
Parameter
Value
Meaning
Basic
32
rp
hh...
In regime Day + Night password hh... for
relay r, in order p=1-5 for 1 impulse and
p=* for 2 impulses (00-999999)
-
33
rp
hh...
In regime Day password hh... for relay r,
in order p=1-5 for 1 impulse and p=* for 2
impulses (00-999999)
-
34
rp
hh...
In regime Night password hh... for relay r,
in order p=1-5 for 1 impulse and p=* for 2
impulses (00-999999)
-
r – relay number [1-2]
p – order [1 - 5] for 1 impulse. 5 passwords (external codes) from Brave‟s
buttons (external code of code lock)
p – order = * to set password (external code) for 2 impulses
hh... – password (external code) for relay switching on from button or
keyboard [2 to 6 places]. Buttons 1 - 10 are programmed as numbers
1-0.
All together 3x12 passwords, depending on the Day/Night setting,
combinations are be input either with the help of the buttons (first 10) or from
the connected keyboard (after pressing the key sign). Switching on a relay is
affected by the relay regime and the choice Day/Night, if the regime 2 groups
of numbers is set, the system is constantly in regime DAY.
There are several rules that needs to be followed when setting a password: