User guide

BRAVE – user guide
21
3 Door intercom service
Functionality of Brave Smyle door inercom is adjustable by parametres
settings (via. Programming parametres capture page 26).
3.1 Signalling overview
The Brave Smyle door intercom signalling acoustically stages which are
happening during operation. Samples of acoustical sounds you can play in
BraveSet ( PC programm).
Stage
Tones
Tone frequency
Line pick up ( OFF HOOK) type 1
–▄▔▄▔▀–
980-1333-1650
Line hang up ( ON HOOK) type1
–▀▔▄▔▄–
1650-1333-980
Line pick up ( OFF HOOK) type 2
–▄▔▀–
800-1067-1200-1333
Line hang up ( ON HOOK) type2
–▀▔▄–
1333-1200-1067-800
Command confirmation by phone
––█––
800
Alerting (knocking) into call
─┴─┴─
Call ending alert
–▔–▔–▔–
1333
Relay activation signal
─▒▒▒▒▒▒─
Modulovaný
Programming enter by phone
–▄▔▀–
980-1067-1180
Programming by phone
––▓–▓–––––
Modulovaný
Parametr confirmation
––█––
800
Programming enter by PC
–▄▔▀–
980-1067-1180
Line connection (Reset)
–▔–▄–▔–
1850-1067-1850
Error (generally all incorrects)
–▔–▔–▔–▔–▔–▔–
800
Memory empty (no number programmed)
–▄▔▄▔▄▔▄▔–
1300-2100
During problems identification is very good when you know the tones. It
helps you monitor how door intercom works and where from comes the problem.
The signalling might be switch of in a few levels (parametres 61,62,63 and 65).