Specifications

016-538-B0-002 Rev. B
12
Fig. 2-4, Input Terminal Block
Fig. 2-3, APX-100W Base
Fig. 2-5, Input Power Cable Clamp
Utility power enters the enclosure through a 0.875" diameter opening at the base of
the APX-100W enclosure. The enclosure accepts a standard one inch conduit fi tting.
2.0 Installation, continued
2.2 Connecting the APX-100W
2.2.1 Utility Power Connection
Tools required:
1/2" fl at-blade screwdriver
1/8" fl at-blade screwdriver
From the External service disconnect, the AC utility wiring connects to the Input
Terminal Block located internally at the base of the APX-100W enclosure.
•
•
Ground Lug
Utility Input