User Manual

ManualsBrandsAlpha Technologies ManualsEquipmentAlphaNet IDH4 for XM3-HP Series - Technical Manual

746-257-B5-001, Rev. A1 (11/2013)

10.1 Denitions and Settings, continued

Parameter OID Description Access Type Value

COMMUNITY STRINGS

atiMgmtSnmpCommunities 1.3.6.1.4.1.926.1.3.1.4.0 Object Identier

atiMgmtSnmpCommGet 1.3.6.1.4.1.926.1.3.1.4.1.0 Default "Read" Community String Read/Write Octet String AlphaGet (default)

atiMgmtSnmpCommSet 1.3.6.1.4.1.926.1.3.1.4.2.0 Default "Read/Write" Community String Read/Write Octet String AlphaSet (default)

SNMP TRAP

atiMgmtSnmpControls 1.3.6.1.4.1.926.1.3.1.5 Object Identier

atiMgmtSnmpTrapOnNormal 1.3.6.1.4.1.926.1.3.1.5.1.0 Traps sent when an item in an alarm

state returns to normal

Read/Write Integer 1 = Disable

2 = Enable (default)

atiMgmtSnmpSendCount 1.3.6.1.4.1.926.1.3.1.5.2.0 Number of times a trap is to be sent/

repeated

Read/Write Integer 1 to 9

1 (default)

atiMgmtSysSnmpTimeout 1.3.6.1.4.1.926.1.3.1.5.3.0 The number of minutes allowed to pass

without SNMP communications. On the

lapse of this many minutes the device

will reset. Setting this value to zero will

prevent timeout resets.

Read/Write Integer 0 to 65,000 (in minutes)

1440 (default)

SOFTWARE DOWNLOAD

atiMgmtSys 1.3.6.1.4.1.926.1.3.2.0 Object Identier

atiMgmtSysDownload 1.3.6.1.4.1.926.1.3.2.1.0 Object Identier

atiMgmtSysDownloadTftpAddress 1.3.6.1.4.1.926.1.3.2.1.1.0 DSM Firmware TFTP Server Address Read/Write IP Address 0.0.0.0 (default)

atiMgmtSysDownloadCtrl 1.3.6.1.4.1.926.1.3.2.1.2.0 DSM Firmware Download "Trigger" Read/Write Integer 1=readOneNext(1)

2=readTwoNext(2)

3=idle(3)

4=abort(4)

5=psReprogram(5)

atiMgmtSysDownloadStatus 1.3.6.1.4.1.926.1.3.2.1.3.0 DSM Firmware download Status Read Only Integer 1=Idle (default)

2=Ready

3=Request

4=Requested

5=Transferring

6=Testing

7=Data Done

8=Error

9=Closing

atiMgmtSysDownloadFile1 1.3.6.1.4.1.926.1.3.2.1.4.0 DSM Firmware Filename Read/Write Octet String DSM rmware lename

atiMgmtSysDownloadFile2 1.3.6.1.4.1.926.1.3.2.1.5.0 Reserved Read/Write Octet String

atiMgmtSysDownloadProgress 1.3.6.1.4.1.926.1.3.2.1.6.0 Download Progress in Bytes Read Only Integer 0:0..100000

atiMgmtSysDownloadSysDescr 1.3.6.1.4.1.926.1.3.2.1.7.0 DSM Firmware description used for

upgrades

Read/Write Octet String i.e. "ATI P01V01.12.0 " (legacy

DSMs)

atiMgmtSysDownloadSysObjectId 1.3.6.1.4.1.926.1.3.2.1.8.0 DSM Hardware Identier used for

upgrades

Read/Write Object Identier 1.3.6.1.4.1.926.1.99.1.1.1.0

atiMgmtSysDownloadCongName 1.3.6.1.4.1.926.1.3.2.1.9.0 DSM Setup File Filename Read/Write Octet String idhdoc04.cfg

atiMgmtSysDownloadCongAddress 1.3.6.1.4.1.926.1.3.2.1.10.0 DSM Setup File TFTP location Read/Write IP Address 0.0.0.0 (default)

atiMgmtSysDownloadCm 1.3.6.1.4.1.926.1.3.2.1.11.0 Force DSM Download from modem's

docsDevSwServerIp (Dual IP)

Read/Write Integer "1=Auto (default)

2=ForceCM"

WEB SERVER ENABLE

atiMgmtSysHttpPrams 1.3.6.1.4.1.926.1.3.2.2.4 Object Identier

atiMgmtSysHttpEnabled 1.3.6.1.4.1.926.1.3.2.2.4.1.0 Access to IDH4 via Web Browser Read/Write Integer 1=Disable

2=Enable (default)

SIMPLE NETWORK TIME PROTOCOL

atiMgmtSysServers 1.3.6.1.4.1.926.1.3.2.3.0 Object Identier

atiMgmtSysServSntp 1.3.6.1.4.1.926.1.3.2.3.1.0 IP Address of SNTP Server (Optional) Read/Write IP Address 0.0.0.0 (default)

10.0 Alpha MIB Parameters, continued