User Manual
71
746-257-B5-001, Rev. A1 (11/2013)
Fig. 9-2, General Tab Screen
9.0 Start Up and Verication, continued
9.1 Initial Start Up and Local Verication, continued
Connect a computer’s network port to the transponder’s Ethernet port using a standard network cable.
Launch an Internet browser and enter 192.168.100.1 into the address. The transponder will return the
Web page shown below. Click on “General” to display the key communications parameters including
upstream and downstream power levels and the cable modem’s IP address, which conrms connectivity.