User Manual

69
746-257-B5-001, Rev. A1 (11/2013)
8.1 36V Single and Dual Strings
Fig. 8-1, 36V System, Single String
Sense Wire Kits:
Alpha P/N: 874-842-21 (6')
Alpha P/N: 874-842-27 (9')
Back of Plug
1
2
3
4
5
6
7
8
Vbatt 3A [C] 36V
Pin 4
3A
POS
NEG
2A
POS
NEG
1A
POS
NEG
A/B [C/D] NEG
Pin 1
Vbatt 2A [C] 24V
Pin 3
Vbatt 1A [C] 12V
Pin 2
To Power Supply
Black
Red
Fig. 8-2, 36V System, Dual String
Sense Wire Kits:
Alpha P/N: 874-842-20 (6')
Alpha P/N: 874-842-28 (9')
POS POS POS
3B
NEG
2B
NEG
1B
NEG
1
2
3
4
5
6
7
8
Back of Plug
3A
POS
NEG
2A
POS
NEG
1A
POS
NEG
A/B [C/D] NEG
Pin 1
Vbatt 3A [C] 36V
Pin 4
Vbatt 2A [C] 24V
Pin 3
Vbatt 1A [C] 12V
Pin 2
Vbatt 3B [D] 36V
Pin 7
Vbatt 2B [D] 24V
Pin 6
Vbatt 1B [D] 12V
Pin 5
To Power Supply
Red
Black
8.0 Battery Sense Wire Kits
Transponder Battery Sense Wire Kits are required for individual battery voltage monitoring when the XM3-
HP SAG option is NOT installed. For XM3-HP power supplies with the SAG option, it is recommended to
use the specic SAG wire kits for the SAG adapter kits to accommodate any existing transponder Battery
Sense Wire Kits. Otherwise, a SAG "No Harness" alarm will be generated if the Battery Sense Wire Kits
are connected to the transponder battery connections (A/B or C/D) instead of the SAG connector.