User Manual
26
746-257-B5-001, Rev. A1 (11/2013)
4.5 Verifying Power Supply and Battery Parameters
The General tab of the Web page also displays the common power supply and battery parameter values.
Important parameters such as current alarm status, inverter status and tamper status can be quickly
veried on this page. Additional power supply parameters can be viewed and edited on the Power Supply
page located in the Advanced Conguration menu.
Fig. 4-11, Power Supply and Battery Parameters
4.0 Web Interface, continued
(data values shown for illustration purposes only)
4.6 Remote Self Tests via the Web Page
Remote Self Tests on power supplies may be started and stopped via the IDH4 Series Web page. This
requires a Level 1 login. Refer to Section 4.3.1, Web Interface Security Levels for User Name and
Security Password.
To launch a remote Self Test, click on the Start Test button.
To stop a remote Self Test before the predened test duration, click on the Stop Test button.
Fig. 4-12, Location of Start Button for Self Test
(data values shown for illustration purposes only)