User Manual
15
746-257-B5-001, Rev. A1 (11/2013)
MIB Parameter Object ID Description Value
docsDevNmAccessIP 1.3.6.1.2.1.69.1.2.1.2.x IP address of trap destination, e.g. NMS
server
e.g. 10.20.30.40
docsDevNmAccessIpMask 1.3.6.1.2.1.69.1.2.1.3.x Must be set to 255.255.255.255 per RFC
4639
255.255.255.255
docsDevNmAccessCommunity 1.3.6.1.2.1.69.1.2.1.4.x Community string used by NMS to query
transponder
alphanumeric string
docsDevNmAccessControl 1.3.6.1.2.1.69.1.2.1.5.x Level of SNMP access to IDH4 Series
from IP address specied in
docsDevNmAccessIpMask
4= Read/Only plus Trap
5= Read/Write plus Trap
6= Trap only, no SNMP access
docsDevNmAccessInterfaces 1.3.6.1.2.1.69.1.2.1.6.x Species the set of interfaces from which
requests from this NMS will be accepted
0x40 : Cable interface (typical)
0x80 : Ethernet interface
0xC0 or 0x00 : Both interfaces
docsDevNmAccessStatus 1.3.6.1.2.1.69.1.2.1.7.x Controls and reects the status of rows
in this table
4
3.2 The DOCSIS Conguration File, continued
3.2.2 Setting SNMP Trap Destination Addresses
Set the SNMP Trap Destination Addresses via the DOCSIS Conguration File by including the
following SNMP parameters:
Table 3-2, Trap Destination Addresses
3.0 Network Conguration, continued
As an alternative to the docsDevNmAccessTable, SNMP Trap Destination Addresses may be set
through the IDH4 proprietary MIB atiMgmtSnmpTrapTable (OID: 1.3.6.1.4.1.926.1.3.1.1) using
a SNMP MIB Browser or as an entry in the Proprietary Conguration File (see Section 3.2.4,
Proprietary Conguration File 'idhdoc04.cfg').
NOTE:
Note: "X" denotes the index of the SNMP entry