Manual

44 746-257-B2-001, Rev. B (01/2014)
6.2.1 SCTE-HMS Congurable Alarms
Table 6-3, Recommended Settings for IDH4 Series Analog Alarms
Analog Alarms and Common Settings
Analog Alarms Description
Alarm
Enable
LOLO LO HI HIHI Deadband
psTotalStringVoltage
36V Scaled representation of the full
battery string in 1/100 Volts units
0x0F 3300 3500 4520 4570 50
48V 0x0F 4400 4785 6030 6100 50
psBatteryVoltage
Battery Voltage of 12V battery,
scaled 1/100 V
0x0F 1050 1150 1530 1550 20
psInputVoltage
120V Scaled representation of the input
line voltage in 1/100 Volts units
0x0F Varies by site. The XM2 will switch to standby at
nominal +15% -20%
220V 0x0F
psOutputVoltage
48V Scaled representation of the
power supply output voltage in
1/100 Volts units.
0x0F 4300 4550 5050 5300 200
60V 0x0F 5650 6000 6600 7000 200
90V 0x0F 7800 8200 9150 9300 200
psPowerOut
Representation of power supply
output power in 1W units.
0x00 It is recommended that psOutputCurrent be used
for output alarms.
psStringChargeCurrent
Battery string charge current,
scaled in 1/100 Amp units.
0x0C Disable Disable 1200 1250 20
psStringFloat
Battery string float charge current,
scaled in 1/100 Amp units.
0x0C Disable Disable 1200 1250 20
psOutputCurrent
15A
Scaled representation of power
supply RMS output current in
1/100 Amp units.
0x0C Disable Disable 1650 1720 20
18A 0x0C Disable Disable 1980 2060 20
22A 0x0C Disable Disable 2420 2530 40
24A 0x0C Disable Disable 2640 2750 40
psTemperature -40 to +80 degrees C 0x0F Varies by site
Alarms for Optional Generator
GenVBatIgnition
Scaled representation of the
generator's ignition battery in
1/100 Volts
0x0F 1150 1200 1500 1550 20
genEnclosureTemperature
Temperature inside generator's
enclosure in degrees C
0x09 -40 0 0 55 5
The following table displays the various XM2 Series analog alarms with common settings for the
IDH4 Series Transponder.
6.0 Data Management
Analog Alarms and Common Settings, IDH4L
Analog Alarms Description
Alarm
Enable
LOLO LO HI HIHI Deadband
psInputVoltage
120V Scaled representation of the input
line voltage in 1/100 Volts units.
0x0F Varies by site. The XM2-300HP will switch to
standby at nominal +10% -15%
220V 0x0F
psOutputVoltage
60V Scaled representation of the
power supply output voltage in
1/100 Volts units.
0x0F 5400 5700 6300 6700 200
63V 0x0F 5650 6000 6600 7000 200
psOutputCurrent
3.5A Scaled representation of power
supply RMS current in 1/100 Amp
units.
0x0C Disable Disable 380 390
5.0A 0x0C Disable Disable 550 575
The following table displays XM2-300HP Series analog alarms with common settings for the
IDH4L Transponder that differ from the IDH4 Series models.
Table 6-4, Recommended Settings for IDH4L Analog Alarms