Manual
28 746-257-B2-001, Rev. B (01/2014)
4.7 Viewing HMS Alarm Status via the Web Page
HMS alarm levels and currently reported states may be viewed by clicking on the HMS Alarms link on the
Advanced Conguration menu. An example is shown below. Parameter values cannot be edited on this
Web page. An SNMP MIB browser or status monitoring software may be used for such edits.
Fig. 4-14, HMS Alarm Conguration
(data values shown for illustration purposes only)
4.0 Web Interface
Refer to Table 6-3, Recommended Settings for IDH4 Series Analog Alarms for information regarding the scaling applied to the
indicated values.