Manual

24 746-257-B2-001, Rev. B (01/2014)
4.0 Web Interface
4.3 Navigating the Web Page
4.3.1 Web Interface Security Levels
Within the IDH4 Series transponder are two levels of function-specic security. General
operations are set at Level 1 and conguration-related functions are set at Level 2.
Default User ID and Passwords are shown in the gure below.
Fig. 4-8, IDH4 Series Transponder Security Levels
IDH4 Series Web Page Security
OID Function Value
1.3.6.1.4.1.4413.2.2.2.1.1.3.3.0 Level 1 User Name Alpha
1.3.6.1.4.1.4413.2.2.2.1.1.3.4.0 Level 1 Security Password AlphaGet
1.3.6.1.4.1.4413.2.2.2.1.1.3.1.0 Level 2 User Name Alpha
1.3.6.1.4.1.4413.2.2.2.1.1.3.2.0 Level 2 Security Password AlphaSet
Web Page Function Security Level
General
System Name, System Contact, System Location,
Common Logical ID
1
Power Supply Self Test 1
Generator Self Test 1
Advanced Communications
Reset Transponder 1
Provisioning Mode - Single IP or Dual IP 2
Congure Static IP Address 2
Congure Proprietary Trap Addresses 2
Power Supply Self Test 1
Advanced Power Supply Congure/Save 2
Reset Output 1/2 2
Advanced Generator
Generator Self Test 1
Reset Latched Alarms 1
Modem Log [Event Log] Reset Log 1
Advanced I/O
Tamper Switch Polarity 1
Enclosure Heater/Cooler Installed 1
4.4 Verifying Communication Parameters
Click the General menu of the web page to display common communication settings and values. Click
the Advanced Communication menu to view additional communication parameters.
Fig. 4-9, Communication Parameters
(data values shown for illustration purposes only)