Manual

746-257-B2-001, Rev. B (01/2014)

3.0 Network Conguration

3.1 Provisioning the DHCP Server with the MAC addresses

On the DHCP server, assign the cable modem’s RF MAC address with a DOCSIS Conguration File

to set modem communication options. (See Section 3.2 for instructions on how to create a DOCSIS

Conguration File).

Fig. 3-1, Locations of MAC Address labels

Identier label

The RF and CPE MAC addresses are located in two places on the IDH4 Series and on the packing slip,

see below.

Cable Modem

and CPE MAC

address label