Instruction Manual
24 745-814-B0-001, Rev. A
5.0 Upgrading Firmware
5.1 Upgrading XP-DSM Modem Firmware
The rmware in the XP-DSM’s modem is upgraded using standard DOCSIS methods as
dened in RFC2669 (available at http://www.faqs.org/rfcs/rfc2669.html).
There are two ways to upgrade the modem’s rmware: by directly setting the appropriate
MIB parameters in the docsDevSoftware branch, or by including the appropriate SNMP
parameters and values in the modem’s DOCSIS Conguration File, stored on the TFTP root
directory.
Both methods are explained below. To build a DOCSIS Conguration File, see Section 3.2.
5.1.1 Identifying the Modem and Obtaining Firmware Files
There are two versions of the cable modem in XP-DSMs, each of which requires its
own rmware and manufacturer’s Code Verication Certicate (CVC) les. These
versions can be differentiated by the rst three hexadecimal pairs, known as the
Organizationally Unique Identier (OUI), in their MAC Addresses:
00:03:08 AM
00:05:CA Hitron
The rmware and CVC les for each modem can be downloaded from the XP-DSM
website: www.Alpha.com>Broadband Cable>Status Monitoring>DSM>XP-DSM Tech.
Support. Take care to download the correct rmware and CVC les for your modem
version.
Modem Firmware Upgrade SNMP Parameters
Parameter Type Value
docsDevSoftware
OID: 1.3.6.1.2.1.69.1.3
docsDevSwServer
OID: 1.3.6.1.2.1.69.1.3.1.0
IP address Set to the IP address of the TFTP
server from which the rmware will be
downloaded.
docDevSwFilename
OID: 1.3.6.1.2.1.69.1.3.2.0.4.2.0
Octet String Set to the lename of the rmware le
downloaded from the Alpha website.
Example: [“rmwareImage.bin”]
docsDevSwAdminStatus
OID: 1.3.6.1.2.1.69.1.3.3.0.4.3.0
Integer 1 = Initiate upgrade
2 = Upgrade on next reboot
3 = Ignore update
docsDevSwOperStatus
OID: 1.3.6.1.2.1.69.1.3.4.0
Read Only,
Integer
1 = A TFTP download is in progress.
2 = Last upgrade was performed at
reboot
3 = Last upgrade was initiated by
setting docsDevSwAdminStatus to “1”
4 = Firmware upgrade failed
5 = Other
docsDevSwCurrentVers
OID: 1.3.6.1.2.1.69.1.3.5.0
Read Only,
Octet String
The current version of rmware in-
stalled in the modem
5.1.2 Modem Firmware Upgrade SNMP Parameters
Table 5-1, Modem Firmware Upgrade SNMP Parameters